现代制造工程
現代製造工程
현대제조공정
MODERN MANUFACTURING ENGINEERING
2008年
6期
66-69
,共4页
李明%郑慧明%余东辉%熊蔡华
李明%鄭慧明%餘東輝%熊蔡華
리명%정혜명%여동휘%웅채화
高速切削%切削力%断屑%有限元
高速切削%切削力%斷屑%有限元
고속절삭%절삭력%단설%유한원
在高速硬切削时,切屑主要为断屑,了解断屑引起的高频交变的切削力的特征,有助于优化切削参数.通过有限元方法对AISI4340钢高速直角切削进行仿真.研究切削速度、背吃刀量和刀具前角等切削参数对断屑的形成频率、平均单位切削力以及切削力的频率的影响.分析结果为优化切削参数、减少高速切削中的振动和提高表面加工质量等提供指导.
在高速硬切削時,切屑主要為斷屑,瞭解斷屑引起的高頻交變的切削力的特徵,有助于優化切削參數.通過有限元方法對AISI4340鋼高速直角切削進行倣真.研究切削速度、揹喫刀量和刀具前角等切削參數對斷屑的形成頻率、平均單位切削力以及切削力的頻率的影響.分析結果為優化切削參數、減少高速切削中的振動和提高錶麵加工質量等提供指導.
재고속경절삭시,절설주요위단설,료해단설인기적고빈교변적절삭력적특정,유조우우화절삭삼수.통과유한원방법대AISI4340강고속직각절삭진행방진.연구절삭속도、배흘도량화도구전각등절삭삼수대단설적형성빈솔、평균단위절삭력이급절삭력적빈솔적영향.분석결과위우화절삭삼수、감소고속절삭중적진동화제고표면가공질량등제공지도.