CAJ | 학술논문

Although conventional model reference adaptive control (MRAC) achieves good tracking performance for cylinder control,the controller structure is much more complicated and has less robustness to disturbance in real applications.This paper discusses the use of simple adaptive control (SAC) for positioning a water hydraulic servo cylinder system.Compared with MRAC,SAC has a simpler and lower order structure,i.e.,higher feasibility.The control performance of SAC is examined and evaluated on a water hydraulic servo cylinder system.With the recent increased concerns over global environmental problems,the water hydraulic technique using pure tap water as a pressure medium has become a new drive source comparable to electric,oil hydraulic,and pneumatic drive systems.This technique is also preferred because of its high power density,high safety against fire hazards in production plants,and easy availability.However,the main problems for precise control in a water hydraulic system are steady state errors and overshoot due to its large friction torque and considerable leakage flow.MRAC has been already applied to compensate for these effects,and better control performances have been obtained.However,there have been no reports on the application of SAC for water hydraulics.To make clear the merits of SAC,the tracking control performance and robustness are discussed based on experimental results.SAC is confirmed to give better tracking performance compared with PI control,and a control precision comparable to MRAC (within 10 μm of the reference position) and higher robustness to parameter change,despite the simple controller.The research results ensure a wider application of simple adaptive control in real mechanical systems.