宇航学报
宇航學報
우항학보
JOURNAL OF ASTRONAUTICS
2010年
10期
2354-2359
,共6页
任萍%侯晓%何高让%郜婕%何铁山
任萍%侯曉%何高讓%郜婕%何鐵山
임평%후효%하고양%고첩%하철산
推进剂%拉伸%压缩%初始模量
推進劑%拉伸%壓縮%初始模量
추진제%랍신%압축%초시모량
Composite solid propellant%Tension%Compression%Initial modulus
为了获得药柱受压状态的模量参数,开展了推进剂压缩性能的探索测试.参照拉伸标准试件,进行了压缩试件尺寸的设计与调试,通过不同高度试件的测试结果及破坏形貌分析,确定了试件尺寸.在此基础上进行了不同应变下的推进剂拉/压对比测试.相同应变率下,压缩模量较拉伸模量高,压缩模量随压缩速度的变化规律与拉伸模量一致,随着速度的提高,模量随之提高.
為瞭穫得藥柱受壓狀態的模量參數,開展瞭推進劑壓縮性能的探索測試.參照拉伸標準試件,進行瞭壓縮試件呎吋的設計與調試,通過不同高度試件的測試結果及破壞形貌分析,確定瞭試件呎吋.在此基礎上進行瞭不同應變下的推進劑拉/壓對比測試.相同應變率下,壓縮模量較拉伸模量高,壓縮模量隨壓縮速度的變化規律與拉伸模量一緻,隨著速度的提高,模量隨之提高.
위료획득약주수압상태적모량삼수,개전료추진제압축성능적탐색측시.삼조랍신표준시건,진행료압축시건척촌적설계여조시,통과불동고도시건적측시결과급파배형모분석,학정료시건척촌.재차기출상진행료불동응변하적추진제랍/압대비측시.상동응변솔하,압축모량교랍신모량고,압축모량수압축속도적변화규률여랍신모량일치,수착속도적제고,모량수지제고.
In order to get the modulus of composite solid propellant under compression state,compression tests are carried out. The specimen is designed for compression tests with reference to the standard tensile specimen. Through analysis of a lot of test results and failure modes to different specimen,the size of specimen is determined. Based on the determined dimension, comparative test of tension and compression are performed under different strain rates. Compressive modulus are higher than tensile modulus at the same strain rate. The varying law of compressive modulus with compressive speed is consistent with tensile modulus. As the speed increases the velocity, the modulus becomes higher.