稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2012年
6期
1060-1064
,共5页
唐杰%张林%魏成富%杨梨容%赵导文
唐傑%張林%魏成富%楊梨容%趙導文
당걸%장림%위성부%양리용%조도문
烧结NdFeB磁体%高压技术%微观结构%性能%晶粒
燒結NdFeB磁體%高壓技術%微觀結構%性能%晶粒
소결NdFeB자체%고압기술%미관결구%성능%정립
采用高压和常规压制方式制备了烧结(PrNd)33Al0.7Nb0.6Cu0.1B1.05Febal(质量分数)永磁体,利用扫描电镜、金相显微镜和振动样品磁强计及维氏硬度计对比研究了两种压制方式对样品微观组织和性能的影响.结果发现:与常规压制方式制备样品相比,1.8 GPa压强成型制备样品的Hcj和(BH)max分别提高了133 kA.m-1和0.6kJ.m-3;而3.6 GPa压强成型制备样品的Hcj和(BH)max分别提高了120.3 kA.m-1和3.2kJ.m-3.高压样品的主相晶粒较细小,富稀土相分布均匀合理,但过高的压强将使其维氏硬度降低.
採用高壓和常規壓製方式製備瞭燒結(PrNd)33Al0.7Nb0.6Cu0.1B1.05Febal(質量分數)永磁體,利用掃描電鏡、金相顯微鏡和振動樣品磁彊計及維氏硬度計對比研究瞭兩種壓製方式對樣品微觀組織和性能的影響.結果髮現:與常規壓製方式製備樣品相比,1.8 GPa壓彊成型製備樣品的Hcj和(BH)max分彆提高瞭133 kA.m-1和0.6kJ.m-3;而3.6 GPa壓彊成型製備樣品的Hcj和(BH)max分彆提高瞭120.3 kA.m-1和3.2kJ.m-3.高壓樣品的主相晶粒較細小,富稀土相分佈均勻閤理,但過高的壓彊將使其維氏硬度降低.
채용고압화상규압제방식제비료소결(PrNd)33Al0.7Nb0.6Cu0.1B1.05Febal(질량분수)영자체,이용소묘전경、금상현미경화진동양품자강계급유씨경도계대비연구료량충압제방식대양품미관조직화성능적영향.결과발현:여상규압제방식제비양품상비,1.8 GPa압강성형제비양품적Hcj화(BH)max분별제고료133 kA.m-1화0.6kJ.m-3;이3.6 GPa압강성형제비양품적Hcj화(BH)max분별제고료120.3 kA.m-1화3.2kJ.m-3.고압양품적주상정립교세소,부희토상분포균균합리,단과고적압강장사기유씨경도강저.