材料工程
材料工程
재료공정
JOURNAL OF MATERIALS ENGINEERING
2008年
9期
36-39
,共4页
王志平%黄继华%班永华%熊进辉%张华%赵兴科
王誌平%黃繼華%班永華%熊進輝%張華%趙興科
왕지평%황계화%반영화%웅진휘%장화%조흥과
Cf/sic陶瓷基复合材料%钛合金%原位合成TiC%反应-复合钎焊
Cf/sic陶瓷基複閤材料%鈦閤金%原位閤成TiC%反應-複閤釬銲
Cf/sic도자기복합재료%태합금%원위합성TiC%반응-복합천한
研究用Cu粉、Ti粉、石墨粉组成的混合粉末真空钎焊Cf/SiC陶瓷基复合材料和钛合金,采用X射线衍射、扫描电镜和能谱仪对接头组织结构进行分析.结果表明:在Cu-25Ti(质量分数/%)粉末中加入适量石墨,经950℃,20min真空钎焊,获得了完整的原位合成TiC增强的复合接头,连接层中原位合成的一定体积分数的TiC可以明显降低接头热应力.石墨颗粒中的C元素和连接层液相中Ti元素发生相互扩散,形成了残余石墨颗粒周围的TiC反应层和分布在连接层中的TiC颗粒,TiC反应速度主要受C元素由石墨颗粒向连接层液相的扩散速度所控制.
研究用Cu粉、Ti粉、石墨粉組成的混閤粉末真空釬銲Cf/SiC陶瓷基複閤材料和鈦閤金,採用X射線衍射、掃描電鏡和能譜儀對接頭組織結構進行分析.結果錶明:在Cu-25Ti(質量分數/%)粉末中加入適量石墨,經950℃,20min真空釬銲,穫得瞭完整的原位閤成TiC增彊的複閤接頭,連接層中原位閤成的一定體積分數的TiC可以明顯降低接頭熱應力.石墨顆粒中的C元素和連接層液相中Ti元素髮生相互擴散,形成瞭殘餘石墨顆粒週圍的TiC反應層和分佈在連接層中的TiC顆粒,TiC反應速度主要受C元素由石墨顆粒嚮連接層液相的擴散速度所控製.
연구용Cu분、Ti분、석묵분조성적혼합분말진공천한Cf/SiC도자기복합재료화태합금,채용X사선연사、소묘전경화능보의대접두조직결구진행분석.결과표명:재Cu-25Ti(질량분수/%)분말중가입괄량석묵,경950℃,20min진공천한,획득료완정적원위합성TiC증강적복합접두,련접층중원위합성적일정체적분수적TiC가이명현강저접두열응력.석묵과립중적C원소화련접층액상중Ti원소발생상호확산,형성료잔여석묵과립주위적TiC반응층화분포재련접층중적TiC과립,TiC반응속도주요수C원소유석묵과립향련접층액상적확산속도소공제.