轧钢
軋鋼
알강
STEEL ROLLING
2011年
5期
4-6
,共3页
袁志学%董中奇%戚翠芬%马水明
袁誌學%董中奇%慼翠芬%馬水明
원지학%동중기%척취분%마수명
SPHD钢%CSP工艺%屈强比%深冲性能
SPHD鋼%CSP工藝%屈彊比%深遲性能
SPHD강%CSP공예%굴강비%심충성능
研究了CSP工艺制度对热轧酸洗深冲板SPHD力学性能的影响.结果表明,采用50%粗轧大压下量,终轧温度为900℃、终轧压下量小于18%,卷取温度为630℃,分段冷却,在热连轧过程中投入辊缝润滑,可有效降低材料的屈强比,提高深冲性能.
研究瞭CSP工藝製度對熱軋痠洗深遲闆SPHD力學性能的影響.結果錶明,採用50%粗軋大壓下量,終軋溫度為900℃、終軋壓下量小于18%,捲取溫度為630℃,分段冷卻,在熱連軋過程中投入輥縫潤滑,可有效降低材料的屈彊比,提高深遲性能.
연구료CSP공예제도대열알산세심충판SPHD역학성능적영향.결과표명,채용50%조알대압하량,종알온도위900℃、종알압하량소우18%,권취온도위630℃,분단냉각,재열련알과정중투입곤봉윤활,가유효강저재료적굴강비,제고심충성능.