光学精密工程
光學精密工程
광학정밀공정
OPTICS AND PRECISION ENGINEERING
2012年
8期
1765-1771
,共7页
刘波%贾继强%丁亚林%苏东风%张雷
劉波%賈繼彊%丁亞林%囌東風%張雷
류파%가계강%정아림%소동풍%장뢰
圆柱凸轮%同轴传动机构%螺旋线导程%传动效率%传动精度
圓柱凸輪%同軸傳動機構%螺鏇線導程%傳動效率%傳動精度
원주철륜%동축전동궤구%라선선도정%전동효솔%전동정도
针对常规传动方式在径向空间较小情况下难以实现同轴旋转运动的变速功能,提出了一种基于圆柱凸轮的同轴变速传动机构.以变焦距镜头的结构为基础,结合使用两个圆柱凸轮,在主、从动凸轮上开出螺旋线槽,使从动凸轮螺旋线槽导程为主动凸轮螺旋线槽导程的n倍,从而实现速比为n的变速传动.对机构的传动效率和传动精度进行分析,得出主动凸轮螺旋线槽的螺旋升角与传动效率和传动精度的关系及相关规律.在实验室对机构的传动精度进行了测试,结果表明其速比精度在1.6%以内.此机构结构紧凑,能够自锁且精度较高.
針對常規傳動方式在徑嚮空間較小情況下難以實現同軸鏇轉運動的變速功能,提齣瞭一種基于圓柱凸輪的同軸變速傳動機構.以變焦距鏡頭的結構為基礎,結閤使用兩箇圓柱凸輪,在主、從動凸輪上開齣螺鏇線槽,使從動凸輪螺鏇線槽導程為主動凸輪螺鏇線槽導程的n倍,從而實現速比為n的變速傳動.對機構的傳動效率和傳動精度進行分析,得齣主動凸輪螺鏇線槽的螺鏇升角與傳動效率和傳動精度的關繫及相關規律.在實驗室對機構的傳動精度進行瞭測試,結果錶明其速比精度在1.6%以內.此機構結構緊湊,能夠自鎖且精度較高.
침대상규전동방식재경향공간교소정황하난이실현동축선전운동적변속공능,제출료일충기우원주철륜적동축변속전동궤구.이변초거경두적결구위기출,결합사용량개원주철륜,재주、종동철륜상개출라선선조,사종동철륜라선선조도정위주동철륜라선선조도정적n배,종이실현속비위n적변속전동.대궤구적전동효솔화전동정도진행분석,득출주동철륜라선선조적라선승각여전동효솔화전동정도적관계급상관규률.재실험실대궤구적전동정도진행료측시,결과표명기속비정도재1.6%이내.차궤구결구긴주,능구자쇄차정도교고.