中国烟草学报
中國煙草學報
중국연초학보
ACTA TABACARIA SINICA
2009年
6期
23-26
,共4页
申晓锋%李华杰%王锐亮%常明彬%李跃锋%堵劲松
申曉鋒%李華傑%王銳亮%常明彬%李躍鋒%堵勁鬆
신효봉%리화걸%왕예량%상명빈%리약봉%도경송
烟丝结构%单支重量%烟支密度%稳定性%灰色关联分析
煙絲結構%單支重量%煙支密度%穩定性%灰色關聯分析
연사결구%단지중량%연지밀도%은정성%회색관련분석
cut tobacco particle size distribution%cigarette weight%cigarette density%stability%grey incidence
采用灰色关联方法分析了来料烟丝的结构与卷制后单支重量和烟支密度及其稳定件的相关关系.结果表明:在试验范围内,大于3.35 mm的长烟丝对卷烟单支重量和烟支密度的影响趋势与对其稳定性的影响趋势相反,即随着大于3.35 mm烟丝比例的增加,卷烟单支重量和烟支密度减小但其稳定性下降;不同长度烟丝对卷烟单支重量和烟支密度及其稳定性的影响程度不同,大于5.60 mm烟丝的影响较小,2.80~4.75 mm烟丝的影响最大.
採用灰色關聯方法分析瞭來料煙絲的結構與捲製後單支重量和煙支密度及其穩定件的相關關繫.結果錶明:在試驗範圍內,大于3.35 mm的長煙絲對捲煙單支重量和煙支密度的影響趨勢與對其穩定性的影響趨勢相反,即隨著大于3.35 mm煙絲比例的增加,捲煙單支重量和煙支密度減小但其穩定性下降;不同長度煙絲對捲煙單支重量和煙支密度及其穩定性的影響程度不同,大于5.60 mm煙絲的影響較小,2.80~4.75 mm煙絲的影響最大.
채용회색관련방법분석료래료연사적결구여권제후단지중량화연지밀도급기은정건적상관관계.결과표명:재시험범위내,대우3.35 mm적장연사대권연단지중량화연지밀도적영향추세여대기은정성적영향추세상반,즉수착대우3.35 mm연사비례적증가,권연단지중량화연지밀도감소단기은정성하강;불동장도연사대권연단지중량화연지밀도급기은정성적영향정도불동,대우5.60 mm연사적영향교소,2.80~4.75 mm연사적영향최대.
Grey incidence was employed to analyze relationship between PSD and cigarette weight and density.Results showed that:within certain range,the effects of cut tobacco longer than 3.35 mm on weight and density and on their stability were opposite.As the proportion of cut tobacco longer than 3.35 mln increased,weight and density decreased and hence reduced stability.The effect of different size of cut tobacco on weight and density was different.Weight and density was less affected by cut tobacco longer than 5.60 mm but mostly affected by cut tobacco between 2.80 mm and 4.75 mm.