CAJ | 학술논문

采用通用有限元软件ANSYS建立了某火箭动力系统试验台承力架有限元模型,分析了该承力架在试验状态和试验准备状态下的应力分布,根据应力分析结果对承力梁的结构和布局作了相应优化,使结构强度满足工作要求。同时对局部结构——承力环支腿进行了应力分析和优化。最后分析了承力架的自身模态,其轴向一阶振型在试验件轴向一阶振型范围内,需进一步采取措施以避免共振。
채용통용유한원연건ANSYS건립료모화전동력계통시험태승력가유한원모형,분석료해승력가재시험상태화시험준비상태하적응력분포,근거응력분석결과대승력량적결구화포국작료상응우화,사결구강도만족공작요구。동시대국부결구——승력배지퇴진행료응력분석화우화。최후분석료승력가적자신모태,기축향일계진형재시험건축향일계진형범위내,수진일보채취조시이피면공진。
The FEA software ANSYS is used in this study to construct the finite element model of the load-bearing frame of a certain propulsion system test-bed,and analyze the stess distribution of the load-bearing frame under the test and ready-tested status.The structure and layout of the loadbearing beam are optimized according to the results of stress analysis to make the strength of the model meet the working requirements.The stress analysis and optimization are also made on the legs of the load-bearing ring,part of the frame.The mode of the frame is studied at last.Its axial first-order mode is within the range of the axial first-order mode of UUT,so further measures should be taken to avoid resonance.