成都大学学报：自然科学版
成都大學學報：自然科學版
성도대학학보：자연과학판
Journal of Chengdu University (Natural Science)
2011年
3期
271-273
,共3页
Cr/WC%涂层%真空烧结%力学性能
Cr/WC%塗層%真空燒結%力學性能
Cr/WC%도층%진공소결%역학성능
Cr/WC%coat%vacuum sintering%mechanical properties
以Cr12MoV模具钢为基体材料,将调配好的WC-Ni60、Cr/WC-Ni60基复合原料均匀涂敷于处理好的基体样品上,经真空烧结制备出复合硬质合金涂层.实验结果表明,涂层结构均匀、致密,Cr/WC-Ni60基涂层的表面硬度高于WC-Ni60基复合涂层.
以Cr12MoV模具鋼為基體材料,將調配好的WC-Ni60、Cr/WC-Ni60基複閤原料均勻塗敷于處理好的基體樣品上,經真空燒結製備齣複閤硬質閤金塗層.實驗結果錶明,塗層結構均勻、緻密,Cr/WC-Ni60基塗層的錶麵硬度高于WC-Ni60基複閤塗層.
이Cr12MoV모구강위기체재료,장조배호적WC-Ni60、Cr/WC-Ni60기복합원료균균도부우처리호적기체양품상,경진공소결제비출복합경질합금도층.실험결과표명,도층결구균균、치밀,Cr/WC-Ni60기도층적표면경도고우WC-Ni60기복합도층.
Cr12MoV die steel was used as basic materoals,prepared complex WC-Ni60 and Cr/WC-Ni60 alloy powders were equably smeared on the samples surface.By vacuum sintering,composite hard alloy coatings were obtained,which its coat structure was even and dense.Surface hardness of Cr/WC-Ni60 coating was higher than that of WC-Ni60.
