热加工工艺
熱加工工藝
열가공공예
HOT WORKING TECHNOLOGY
2011年
10期
122-125
,共4页
复合电沉积%碳纳米管%内应力
複閤電沉積%碳納米管%內應力
복합전침적%탄납미관%내응력
采用复合电沉积方法在紫铜片上制备碳纳米管铅锡合金复合减摩镀层;用阴极弯曲法研究了电流密度和镀液温度对碳纳米管铅锡复合镀层内应力的影响;在不同碳纳米管浓度的镀液中制备了复合镀层的试样,用X射线衍射法测定了各复合镀层的内应力.结果表明,碳纳米管铅锡合金复合镀层的内应力随电流密度的增加而升高,但随镀液温度的升高而降低.保证电流密度和镀液温度不变,碳纳米管的含量为2g/L,复合镀层的内应力降至最低;碳纳米管在镀层中的弥散分布起到了应力传递作用,减少了应力集中而产生的微裂纹.
採用複閤電沉積方法在紫銅片上製備碳納米管鉛錫閤金複閤減摩鍍層;用陰極彎麯法研究瞭電流密度和鍍液溫度對碳納米管鉛錫複閤鍍層內應力的影響;在不同碳納米管濃度的鍍液中製備瞭複閤鍍層的試樣,用X射線衍射法測定瞭各複閤鍍層的內應力.結果錶明,碳納米管鉛錫閤金複閤鍍層的內應力隨電流密度的增加而升高,但隨鍍液溫度的升高而降低.保證電流密度和鍍液溫度不變,碳納米管的含量為2g/L,複閤鍍層的內應力降至最低;碳納米管在鍍層中的瀰散分佈起到瞭應力傳遞作用,減少瞭應力集中而產生的微裂紋.
채용복합전침적방법재자동편상제비탄납미관연석합금복합감마도층;용음겁만곡법연구료전류밀도화도액온도대탄납미관연석복합도층내응력적영향;재불동탄납미관농도적도액중제비료복합도층적시양,용X사선연사법측정료각복합도층적내응력.결과표명,탄납미관연석합금복합도층적내응력수전류밀도적증가이승고,단수도액온도적승고이강저.보증전류밀도화도액온도불변,탄납미관적함량위2g/L,복합도층적내응력강지최저;탄납미관재도층중적미산분포기도료응력전체작용,감소료응력집중이산생적미렬문.