合成纤维工业
閤成纖維工業
합성섬유공업
CHINA SYNTHETIC FIBER INDUSTRY
2010年
6期
11-14
,共4页
居法银%杭祖圣%曹晓苗%应三九
居法銀%杭祖聖%曹曉苗%應三九
거법은%항조골%조효묘%응삼구
三聚氰胺纤维%气相纳米二氧化硅%原位聚合%力学性能%改性
三聚氰胺纖維%氣相納米二氧化硅%原位聚閤%力學性能%改性
삼취청알섬유%기상납미이양화규%원위취합%역학성능%개성
采用原位聚合的方法,以偶联剂KH-570进行表面改性的气相纳米SiO2与三聚氰胺纺丝原液进行混合,经干法纺丝,制得气相纳米SiO2粒子改性三聚氰胺纤维(MF),对改性MF的结构与性能进行了表征.结果表明:MF表面光滑,不含有气泡,经过KH-570改性的气相纳米SiO2在纤维的表面分布较均匀,起到消光作用,纤维直径小于100 μm;由于气相纳米SiO2的加入,MF断裂强度有所减小,断裂伸长率提高达6.05%,纤维耐热性能没有较大变化,其热分解温度为390 ℃.
採用原位聚閤的方法,以偶聯劑KH-570進行錶麵改性的氣相納米SiO2與三聚氰胺紡絲原液進行混閤,經榦法紡絲,製得氣相納米SiO2粒子改性三聚氰胺纖維(MF),對改性MF的結構與性能進行瞭錶徵.結果錶明:MF錶麵光滑,不含有氣泡,經過KH-570改性的氣相納米SiO2在纖維的錶麵分佈較均勻,起到消光作用,纖維直徑小于100 μm;由于氣相納米SiO2的加入,MF斷裂彊度有所減小,斷裂伸長率提高達6.05%,纖維耐熱性能沒有較大變化,其熱分解溫度為390 ℃.
채용원위취합적방법,이우련제KH-570진행표면개성적기상납미SiO2여삼취청알방사원액진행혼합,경간법방사,제득기상납미SiO2입자개성삼취청알섬유(MF),대개성MF적결구여성능진행료표정.결과표명:MF표면광활,불함유기포,경과KH-570개성적기상납미SiO2재섬유적표면분포교균균,기도소광작용,섬유직경소우100 μm;유우기상납미SiO2적가입,MF단렬강도유소감소,단렬신장솔제고체6.05%,섬유내열성능몰유교대변화,기열분해온도위390 ℃.