化学世界
化學世界
화학세계
CHEMICAL WORLD
2006年
6期
321-324
,共4页
赵景联%赵靓%苏慈%李厚宝
趙景聯%趙靚%囌慈%李厚寶
조경련%조정%소자%리후보
固体酸催化剂%微波辐射合成%十二烷基苯磺酸钠
固體痠催化劑%微波輻射閤成%十二烷基苯磺痠鈉
고체산최화제%미파복사합성%십이완기분광산납
以微波辐射方法合成了NaY分子筛、二氧化锆和二氧化钛不同载体负载磷钨酸、磷钼酸、硅钨酸不同杂多酸的固体酸催化剂,用Hammett指示剂与紫外光谱相结合的方法测定固体杂多酸催化剂的酸度,发现SiW12/NaY酸性最强.单因子实验研究了制备条件对SiW12/NaY固体酸催化剂酸活性的影响,正交试验探讨了影响SiW12/NaY固载杂多酸活性四个因素的大小顺序为:烧结时间>烧结功率>浸泡浓度>浸泡时间,催化剂制备的优化条件为:硅钨酸水溶液浓度0.10 mol/L,浸泡时间30 h,微波功率750 W,烧结时间40min,制得的催化剂酸度最高.应用0.050 g SiW12/NaY固载硅钨酸催化剂降解150 mg/L,pH值为3的十二烷基苯磺酸钠(LAS)溶液60min,LAS降解率由76%提高到94.5%.固载硅钨酸催化剂对LAS的降解率明显提高.
以微波輻射方法閤成瞭NaY分子篩、二氧化鋯和二氧化鈦不同載體負載燐鎢痠、燐鉬痠、硅鎢痠不同雜多痠的固體痠催化劑,用Hammett指示劑與紫外光譜相結閤的方法測定固體雜多痠催化劑的痠度,髮現SiW12/NaY痠性最彊.單因子實驗研究瞭製備條件對SiW12/NaY固體痠催化劑痠活性的影響,正交試驗探討瞭影響SiW12/NaY固載雜多痠活性四箇因素的大小順序為:燒結時間>燒結功率>浸泡濃度>浸泡時間,催化劑製備的優化條件為:硅鎢痠水溶液濃度0.10 mol/L,浸泡時間30 h,微波功率750 W,燒結時間40min,製得的催化劑痠度最高.應用0.050 g SiW12/NaY固載硅鎢痠催化劑降解150 mg/L,pH值為3的十二烷基苯磺痠鈉(LAS)溶液60min,LAS降解率由76%提高到94.5%.固載硅鎢痠催化劑對LAS的降解率明顯提高.
이미파복사방법합성료NaY분자사、이양화고화이양화태불동재체부재린오산、린목산、규오산불동잡다산적고체산최화제,용Hammett지시제여자외광보상결합적방법측정고체잡다산최화제적산도,발현SiW12/NaY산성최강.단인자실험연구료제비조건대SiW12/NaY고체산최화제산활성적영향,정교시험탐토료영향SiW12/NaY고재잡다산활성사개인소적대소순서위:소결시간>소결공솔>침포농도>침포시간,최화제제비적우화조건위:규오산수용액농도0.10 mol/L,침포시간30 h,미파공솔750 W,소결시간40min,제득적최화제산도최고.응용0.050 g SiW12/NaY고재규오산최화제강해150 mg/L,pH치위3적십이완기분광산납(LAS)용액60min,LAS강해솔유76%제고도94.5%.고재규오산최화제대LAS적강해솔명현제고.