弹性体
彈性體
탄성체
CHINA ELASTOMERICS
2002年
5期
50-57
,共8页
聚烯烃%马来酸酐%接枝%增容剂%共混%改性
聚烯烴%馬來痠酐%接枝%增容劑%共混%改性
취희경%마래산항%접지%증용제%공혼%개성
聚合物共混改性是制备新型高分子材料极为有效的方法,其中的关键是要解决各种聚合物之间一般相容性很差的问题,通常的解决办法是加入合适的增容剂,聚烯烃接枝马来酸酐(PO-g-MAH)是研究的很多的增容剂.制备聚烯烃接枝马来酸酐的方法有熔融法、溶液法、辐射法和固相法,其中最重要的方法是熔融法,笔者主要介绍了聚烯烃接枝马来酸酐作为增容剂在改性聚酰胺(PA6、PA66、PA12、PA1010)、聚酯(PET、PBT)、热塑性聚氨酯(TPU)等聚合物共混物,聚烯烃/无机填料,聚烯烃/有机纤维,复合增强材料,粘结剂等方面的应用,聚烯烃接枝马来酸酐与其它聚合物原位反应生成共聚物,一方面降低了表面张力,使得分散相在基体中分散得更好;另一方面增强了两相的粘合力,从而达到了增容的目的.
聚閤物共混改性是製備新型高分子材料極為有效的方法,其中的關鍵是要解決各種聚閤物之間一般相容性很差的問題,通常的解決辦法是加入閤適的增容劑,聚烯烴接枝馬來痠酐(PO-g-MAH)是研究的很多的增容劑.製備聚烯烴接枝馬來痠酐的方法有鎔融法、溶液法、輻射法和固相法,其中最重要的方法是鎔融法,筆者主要介紹瞭聚烯烴接枝馬來痠酐作為增容劑在改性聚酰胺(PA6、PA66、PA12、PA1010)、聚酯(PET、PBT)、熱塑性聚氨酯(TPU)等聚閤物共混物,聚烯烴/無機填料,聚烯烴/有機纖維,複閤增彊材料,粘結劑等方麵的應用,聚烯烴接枝馬來痠酐與其它聚閤物原位反應生成共聚物,一方麵降低瞭錶麵張力,使得分散相在基體中分散得更好;另一方麵增彊瞭兩相的粘閤力,從而達到瞭增容的目的.
취합물공혼개성시제비신형고분자재료겁위유효적방법,기중적관건시요해결각충취합물지간일반상용성흔차적문제,통상적해결판법시가입합괄적증용제,취희경접지마래산항(PO-g-MAH)시연구적흔다적증용제.제비취희경접지마래산항적방법유용융법、용액법、복사법화고상법,기중최중요적방법시용융법,필자주요개소료취희경접지마래산항작위증용제재개성취선알(PA6、PA66、PA12、PA1010)、취지(PET、PBT)、열소성취안지(TPU)등취합물공혼물,취희경/무궤전료,취희경/유궤섬유,복합증강재료,점결제등방면적응용,취희경접지마래산항여기타취합물원위반응생성공취물,일방면강저료표면장력,사득분산상재기체중분산득경호;령일방면증강료량상적점합력,종이체도료증용적목적.