浙江大学学报(工学版)
浙江大學學報(工學版)
절강대학학보(공학판)
JOURNAL OF ZHEJIANG UNIVERSITY (ENGINEERING SCIENCE)
2005年
7期
1043-1046
,共4页
洪荣华%朱华%王建新%石化彪
洪榮華%硃華%王建新%石化彪
홍영화%주화%왕건신%석화표
切向漩流半开式热管%传热特性%蒸发%沸腾
切嚮漩流半開式熱管%傳熱特性%蒸髮%沸騰
절향선류반개식열관%전열특성%증발%비등
为了强化半开式热管的传热效果,提出了一种在半开式热管凝结段的侧端切向对称开孔的方法.通过改变侧端切向开口的位置和侧端切向开口孔径的大小,研究了切向漩流半开式热管的沸腾换热和凝结换热特性,以及这种结构的变化对切向漩流半开式热管总体传热性能的影响.实验结果表明,沸腾段的换热系数随着开孔的相对位置增大而降低,随着侧端开口直径的增大而增大;开孔相对位置在30%~50%时,凝结换热系数较低;凝结换热系数随侧端开口直径的增大而增大,侧端开孔相对位置越小,侧端开口直径越大,总体传热性能越好.
為瞭彊化半開式熱管的傳熱效果,提齣瞭一種在半開式熱管凝結段的側耑切嚮對稱開孔的方法.通過改變側耑切嚮開口的位置和側耑切嚮開口孔徑的大小,研究瞭切嚮漩流半開式熱管的沸騰換熱和凝結換熱特性,以及這種結構的變化對切嚮漩流半開式熱管總體傳熱性能的影響.實驗結果錶明,沸騰段的換熱繫數隨著開孔的相對位置增大而降低,隨著側耑開口直徑的增大而增大;開孔相對位置在30%~50%時,凝結換熱繫數較低;凝結換熱繫數隨側耑開口直徑的增大而增大,側耑開孔相對位置越小,側耑開口直徑越大,總體傳熱性能越好.
위료강화반개식열관적전열효과,제출료일충재반개식열관응결단적측단절향대칭개공적방법.통과개변측단절향개구적위치화측단절향개구공경적대소,연구료절향선류반개식열관적비등환열화응결환열특성,이급저충결구적변화대절향선류반개식열관총체전열성능적영향.실험결과표명,비등단적환열계수수착개공적상대위치증대이강저,수착측단개구직경적증대이증대;개공상대위치재30%~50%시,응결환열계수교저;응결환열계수수측단개구직경적증대이증대,측단개공상대위치월소,측단개구직경월대,총체전열성능월호.