中国实验方剂学杂志
中國實驗方劑學雜誌
중국실험방제학잡지
CHINESE JOURNAL OF EXPERIMENTAL TRADITIONAL MEDICAL FORMULAE
2010年
5期
7-10
,共4页
藕节%炒炭工艺%总多酚%水浸出物
藕節%炒炭工藝%總多酚%水浸齣物
우절%초탄공예%총다분%수침출물
目的:研究藕节炒炭工艺条件.方法:采用正交试验,以藕节炭中总多酚、水溶性浸出物的含量为指标,结合成品性状,对藕节炒炭的工艺条件进行优选,并进行中试实验.结果:小试优选藕节炒炭投料300 g,投料温度200℃、炒制时间22rain.中试炒炭投料10 kg,炒筒转速26 r/min,炒筒温度预设下限195℃,上限205℃,炒制时间约10 min.结论:小试炒炭的工艺条件与中试有差异.
目的:研究藕節炒炭工藝條件.方法:採用正交試驗,以藕節炭中總多酚、水溶性浸齣物的含量為指標,結閤成品性狀,對藕節炒炭的工藝條件進行優選,併進行中試實驗.結果:小試優選藕節炒炭投料300 g,投料溫度200℃、炒製時間22rain.中試炒炭投料10 kg,炒筒轉速26 r/min,炒筒溫度預設下限195℃,上限205℃,炒製時間約10 min.結論:小試炒炭的工藝條件與中試有差異.
목적:연구우절초탄공예조건.방법:채용정교시험,이우절탄중총다분、수용성침출물적함량위지표,결합성품성상,대우절초탄적공예조건진행우선,병진행중시실험.결과:소시우선우절초탄투료300 g,투료온도200℃、초제시간22rain.중시초탄투료10 kg,초통전속26 r/min,초통온도예설하한195℃,상한205℃,초제시간약10 min.결론:소시초탄적공예조건여중시유차이.