北京理工大学学报
北京理工大學學報
북경리공대학학보
JOURNAL OF BEIJING INSTITUTE OF TECHNOLOGY
2004年
9期
829-832,836
,共5页
聚酰胺6%阻燃%聚磷酸蜜胺%八钼酸蜜胺
聚酰胺6%阻燃%聚燐痠蜜胺%八鉬痠蜜胺
취선알6%조연%취린산밀알%팔목산밀알
采用聚磷酸蜜胺(MPP)和八钼酸蜜胺(MOM)复合物阻燃PA6,测定了阻燃PA6的氧指数(LOI)、UL 94V阻燃性及热稳定性.用傅里叶变换红外光谱(FTIR)和SEM技术分析了阻燃PA6的热分解残余物,以锥形量热仪测定了阻燃PA6与火灾有关的阻燃参数,包括释热速度、质量损失速度、有效燃烧热、比消光面积等,并测定了阻燃PA6残炭表面的元素组成及XPS曲线拟合数据.结果表明,MPP-MOM复合物添加量为27%时(质量分数),PA6的阻燃性能达UL 94V-0级,氧指数为35.3%;PA6的释热速度峰值、释热速度平均值、总释热量、有效燃烧热以及质量损失速率明显下降,同时也证明了MOM具有好的协同阻燃效应.
採用聚燐痠蜜胺(MPP)和八鉬痠蜜胺(MOM)複閤物阻燃PA6,測定瞭阻燃PA6的氧指數(LOI)、UL 94V阻燃性及熱穩定性.用傅裏葉變換紅外光譜(FTIR)和SEM技術分析瞭阻燃PA6的熱分解殘餘物,以錐形量熱儀測定瞭阻燃PA6與火災有關的阻燃參數,包括釋熱速度、質量損失速度、有效燃燒熱、比消光麵積等,併測定瞭阻燃PA6殘炭錶麵的元素組成及XPS麯線擬閤數據.結果錶明,MPP-MOM複閤物添加量為27%時(質量分數),PA6的阻燃性能達UL 94V-0級,氧指數為35.3%;PA6的釋熱速度峰值、釋熱速度平均值、總釋熱量、有效燃燒熱以及質量損失速率明顯下降,同時也證明瞭MOM具有好的協同阻燃效應.
채용취린산밀알(MPP)화팔목산밀알(MOM)복합물조연PA6,측정료조연PA6적양지수(LOI)、UL 94V조연성급열은정성.용부리협변환홍외광보(FTIR)화SEM기술분석료조연PA6적열분해잔여물,이추형량열의측정료조연PA6여화재유관적조연삼수,포괄석열속도、질량손실속도、유효연소열、비소광면적등,병측정료조연PA6잔탄표면적원소조성급XPS곡선의합수거.결과표명,MPP-MOM복합물첨가량위27%시(질량분수),PA6적조연성능체UL 94V-0급,양지수위35.3%;PA6적석열속도봉치、석열속도평균치、총석열량、유효연소열이급질량손실속솔명현하강,동시야증명료MOM구유호적협동조연효응.