CAJ | 학술논문

以捻系数、分梳辊速度、转杯速度为试验因子,采用单因子实验和二次通用旋转组合设计法,研究麻赛尔/棉混纺纱线性能与工艺参数之间的关系,找出最佳工艺参数;并用最佳工艺参数纺制不同混纺比的麻赛尔/棉混纺纱,比较不同混纺比对纱线性能的影响.结果表明：随着捻系数、分梳辊速度、转杯速度的增加,成纱的断裂强力均呈现出先增加后下降的变化规律;随着麻赛尔纤维含量的增加,混纺纱线的断裂强力逐渐下降.
이념계수、분소곤속도、전배속도위시험인자,채용단인자실험화이차통용선전조합설계법,연구마새이/면혼방사선성능여공예삼수지간적관계,조출최가공예삼수;병용최가공예삼수방제불동혼방비적마새이/면혼방사,비교불동혼방비대사선성능적영향.결과표명：수착념계수、분소곤속도、전배속도적증가,성사적단렬강력균정현출선증가후하강적변화규률;수착마새이섬유함량적증가,혼방사선적단렬강력축점하강.
By using twist multiplier,combing roller speed,rotor speed as test factors,the single factor experimental design method and the two general revolving combination design method through the two ways are employed to investigate the relation between the Jutecell/cotton blended yarn properties and processing parameter,then the optimum processing parameter is obtained.Additionally,the optimum processing parameter to spin the Jutecell/cotton blended yarn in different blending ratio is used to compare different impacts on the yarn properties from various blending ratio.The result shows that with the twist multiplier,combing roller speed and rotor speed increaseing,the yarn breaking strength shows the first-increased-then-decreased regularity;as the content of Jutecell increases,blended yarn breaking strength decreases gradually.