合成纤维工业
閤成纖維工業
합성섬유공업
CHINA SYNTHETIC FIBER INDUSTRY
2008年
1期
54-56
,共3页
聚丙烯腈纤维%高收缩纤维%沸水收缩率%影响因素%控制措施
聚丙烯腈纖維%高收縮纖維%沸水收縮率%影響因素%控製措施
취병희정섬유%고수축섬유%비수수축솔%영향인소%공제조시
分析了共聚物单体的配比、定型条件、第二热拉伸等对高收缩腈纶沸水收缩率的影响.提出了相应控制措施:适当提高第二单体醋酸乙烯酯的含量,采用加压饱和蒸汽、定型压力设定为0.20~0.24 MPa.控制第二拉伸温度为95℃,稳定第二拉伸倍数,可稳定高收缩腈纶的沸水收缩率为23%.
分析瞭共聚物單體的配比、定型條件、第二熱拉伸等對高收縮腈綸沸水收縮率的影響.提齣瞭相應控製措施:適噹提高第二單體醋痠乙烯酯的含量,採用加壓飽和蒸汽、定型壓力設定為0.20~0.24 MPa.控製第二拉伸溫度為95℃,穩定第二拉伸倍數,可穩定高收縮腈綸的沸水收縮率為23%.
분석료공취물단체적배비、정형조건、제이열랍신등대고수축정륜비수수축솔적영향.제출료상응공제조시:괄당제고제이단체작산을희지적함량,채용가압포화증기、정형압력설정위0.20~0.24 MPa.공제제이랍신온도위95℃,은정제이랍신배수,가은정고수축정륜적비수수축솔위23%.