北京化工大学学报(自然科学版)
北京化工大學學報(自然科學版)
북경화공대학학보(자연과학판)
JOURNAL OF BEIJING UNIVERSITY OF CHEMICAL TECHNOLOGY(NATURAL SCIENCE EDITION)
2009年
1期
28-32
,共5页
秦培勇%杨洁%陈翠仙%李继定%孙本惠
秦培勇%楊潔%陳翠仙%李繼定%孫本惠
진배용%양길%진취선%리계정%손본혜
杂萘联苯聚醚砜酮%计算机直接实验设计%聚乙烯吡咯烷酮%相转化
雜萘聯苯聚醚砜酮%計算機直接實驗設計%聚乙烯吡咯烷酮%相轉化
잡내련분취미풍동%계산궤직접실험설계%취을희필각완동%상전화
以杂萘联苯聚醚砜酮/聚乙烯吡咯烷酮/N-甲基吡咯烷酮(PPESK/PVP/NMP)为铸膜液体系,对杂萘联苯聚醚砜酮的膜结构进行了计算机直接试验设计.结果发现采用膜结构参数--趋向海绵膜结构特征分数St,可以对膜结构进行定量化表征和设计.以聚合物浓度和PVP添加剂作为影响因素,通过直接实验设计,分别得到了描述PPESK膜水通量、截留率、膜结构的3个数学模型.这3个数学模型表明,PVP添加剂和聚合物浓度能显著地影响膜的水通量、截留率和结构;随着聚合物和PVP添加剂浓度的增加,膜的水通量显著下降,截留率降低,膜结构逐渐由指状结构变为海绵结构.实验值和模型的预测值吻合得较好,表明采用直接实验可以实现对PPESK超滤膜的膜结构与性能的调控.
以雜萘聯苯聚醚砜酮/聚乙烯吡咯烷酮/N-甲基吡咯烷酮(PPESK/PVP/NMP)為鑄膜液體繫,對雜萘聯苯聚醚砜酮的膜結構進行瞭計算機直接試驗設計.結果髮現採用膜結構參數--趨嚮海綿膜結構特徵分數St,可以對膜結構進行定量化錶徵和設計.以聚閤物濃度和PVP添加劑作為影響因素,通過直接實驗設計,分彆得到瞭描述PPESK膜水通量、截留率、膜結構的3箇數學模型.這3箇數學模型錶明,PVP添加劑和聚閤物濃度能顯著地影響膜的水通量、截留率和結構;隨著聚閤物和PVP添加劑濃度的增加,膜的水通量顯著下降,截留率降低,膜結構逐漸由指狀結構變為海綿結構.實驗值和模型的預測值吻閤得較好,錶明採用直接實驗可以實現對PPESK超濾膜的膜結構與性能的調控.
이잡내련분취미풍동/취을희필각완동/N-갑기필각완동(PPESK/PVP/NMP)위주막액체계,대잡내련분취미풍동적막결구진행료계산궤직접시험설계.결과발현채용막결구삼수--추향해면막결구특정분수St,가이대막결구진행정양화표정화설계.이취합물농도화PVP첨가제작위영향인소,통과직접실험설계,분별득도료묘술PPESK막수통량、절류솔、막결구적3개수학모형.저3개수학모형표명,PVP첨가제화취합물농도능현저지영향막적수통량、절류솔화결구;수착취합물화PVP첨가제농도적증가,막적수통량현저하강,절류솔강저,막결구축점유지상결구변위해면결구.실험치화모형적예측치문합득교호,표명채용직접실험가이실현대PPESK초려막적막결구여성능적조공.