国防科技大学学报
國防科技大學學報
국방과기대학학보
JOURNAL OF NATIONAL UNIVERSITY OF DEFENSE TECHNOLOGY
2010年
4期
1-6
,共6页
陈逖%孙明波%范晓樯%刘卫东
陳逖%孫明波%範曉檣%劉衛東
진적%손명파%범효장%류위동
k-ω SST湍流模型%混合LES/RANS方法%AUSM+-up格式%激波/湍流边界层干扰
k-ω SST湍流模型%混閤LES/RANS方法%AUSM+-up格式%激波/湍流邊界層榦擾
k-ω SST단류모형%혼합LES/RANS방법%AUSM+-up격식%격파/단류변계층간우
为了降低高雷诺数条件下大涡模拟方法的计算量,将两方程k-ωSST湍流模型与Yoshizawa一方程亚格子模型通过一个衔接函数相结合,构造一种混合大涡/雷诺平均NS方程模拟方法(混合LES/RANS).使用这种方法及AUSM+-up格式对20°压缩斜坡的马赫2.85流动进行模拟,并考察了固定入口和在入口添加白噪声两种湍流入口边界条件对于结果的影响.模拟结果再现了边界层的分离、再附以及分离激波等现象,计算得到的分离区要显著大于试验结果,对于这种混合模拟方法的缺点进行了分析,并提出了可能的改进方法.
為瞭降低高雷諾數條件下大渦模擬方法的計算量,將兩方程k-ωSST湍流模型與Yoshizawa一方程亞格子模型通過一箇銜接函數相結閤,構造一種混閤大渦/雷諾平均NS方程模擬方法(混閤LES/RANS).使用這種方法及AUSM+-up格式對20°壓縮斜坡的馬赫2.85流動進行模擬,併攷察瞭固定入口和在入口添加白譟聲兩種湍流入口邊界條件對于結果的影響.模擬結果再現瞭邊界層的分離、再附以及分離激波等現象,計算得到的分離區要顯著大于試驗結果,對于這種混閤模擬方法的缺點進行瞭分析,併提齣瞭可能的改進方法.
위료강저고뢰낙수조건하대와모의방법적계산량,장량방정k-ωSST단류모형여Yoshizawa일방정아격자모형통과일개함접함수상결합,구조일충혼합대와/뢰낙평균NS방정모의방법(혼합LES/RANS).사용저충방법급AUSM+-up격식대20°압축사파적마혁2.85류동진행모의,병고찰료고정입구화재입구첨가백조성량충단류입구변계조건대우결과적영향.모의결과재현료변계층적분리、재부이급분리격파등현상,계산득도적분리구요현저대우시험결과,대우저충혼합모의방법적결점진행료분석,병제출료가능적개진방법.