激光技术
激光技術
격광기술
LASER TECHNOLOGY
2013年
4期
431-436
,共6页
激光技术%快速反射镜%对准控制%步进电机
激光技術%快速反射鏡%對準控製%步進電機
격광기술%쾌속반사경%대준공제%보진전궤
laser technique%fast reflector%autocollimator control%step motor
为了校正激光发射设备中激光对准光路的偏差,设计了一种激光对准快速反射镜控制系统。采用步进电机作为驱动,控制快速反射镜在互相垂直的两个方向进行运动,校正激光光路的偏差,达到了精确控制激光光路的目的。对激光对准快速反射镜的工作原理和设计过程进行了详细阐述,并利用对准控制机箱等硬件设备对软硬件设计进行了实验验证,取得了较好的实验数据。结果表明,快速反射镜控制系统在小角度工作范围内方位误差和俯仰误差均方根都小于1″,即控制精度小于1″。该系统能够很好地控制快速反射镜进行2维运动,软件设计和硬件设计都是正确可靠的,能够满足激光对准控制系统精确控制激光光路的要求。
為瞭校正激光髮射設備中激光對準光路的偏差,設計瞭一種激光對準快速反射鏡控製繫統。採用步進電機作為驅動,控製快速反射鏡在互相垂直的兩箇方嚮進行運動,校正激光光路的偏差,達到瞭精確控製激光光路的目的。對激光對準快速反射鏡的工作原理和設計過程進行瞭詳細闡述,併利用對準控製機箱等硬件設備對軟硬件設計進行瞭實驗驗證,取得瞭較好的實驗數據。結果錶明,快速反射鏡控製繫統在小角度工作範圍內方位誤差和俯仰誤差均方根都小于1″,即控製精度小于1″。該繫統能夠很好地控製快速反射鏡進行2維運動,軟件設計和硬件設計都是正確可靠的,能夠滿足激光對準控製繫統精確控製激光光路的要求。
위료교정격광발사설비중격광대준광로적편차,설계료일충격광대준쾌속반사경공제계통。채용보진전궤작위구동,공제쾌속반사경재호상수직적량개방향진행운동,교정격광광로적편차,체도료정학공제격광광로적목적。대격광대준쾌속반사경적공작원리화설계과정진행료상세천술,병이용대준공제궤상등경건설비대연경건설계진행료실험험증,취득료교호적실험수거。결과표명,쾌속반사경공제계통재소각도공작범위내방위오차화부앙오차균방근도소우1″,즉공제정도소우1″。해계통능구흔호지공제쾌속반사경진행2유운동,연건설계화경건설계도시정학가고적,능구만족격광대준공제계통정학공제격광광로적요구。
In order to revise the light-route deviation of a laser autocollimator , a fast reflector control system of fast reflector in laser autocollimator control was designed .By adopting a step motor as power element , the movement of fast reflector in 2-D way was controlled, the light-route deviation of laser was eliminated and the light route of laser could be controlled accurately.The hardware and software of the fast reflector control system were expatiated exactly .Using hardware such as the laser autocollimator control box , the hardware and software design of laser autocollimator control system were validated.The experimental results show that root-mean-square of both azimuth errors and elevation direction errors are less than 1″when the working range of the fast reflector system is small , that is to say, the precision of fast reflector control system is less than 1″.Fast reflector control system can control the movement of fast reflector in 2-D way exactly.The hardware and software of the design is correct and reliable .The fast reflector control system can satisfy the demand of the laser autocollimator control system .