电气技术
電氣技術
전기기술
ELECTRICAL ENGINEERING
2011年
11期
8-11,40
,共5页
王惠军%刘剑峰%刘西全%姚丽%林岩
王惠軍%劉劍峰%劉西全%姚麗%林巖
왕혜군%류검봉%류서전%요려%림암
混合%永磁%发电机%设计
混閤%永磁%髮電機%設計
혼합%영자%발전궤%설계
hybrid%permanent magnet%generator%design
为了降低永磁发电机的电压调整率,本文研究了一种混合励磁永磁发电机。在详细分析其结构与工作原理的基础上,给出设计该种发电机的设计数学模型。同时,利用三维有限元软件进行分析。最后,设计并加工了一台7.5kW样机,从试验结果来看,通过调节电励磁电流,气隙磁通具有较好的调节特性,从而获得较低电压调整率。
為瞭降低永磁髮電機的電壓調整率,本文研究瞭一種混閤勵磁永磁髮電機。在詳細分析其結構與工作原理的基礎上,給齣設計該種髮電機的設計數學模型。同時,利用三維有限元軟件進行分析。最後,設計併加工瞭一檯7.5kW樣機,從試驗結果來看,通過調節電勵磁電流,氣隙磁通具有較好的調節特性,從而穫得較低電壓調整率。
위료강저영자발전궤적전압조정솔,본문연구료일충혼합려자영자발전궤。재상세분석기결구여공작원리적기출상,급출설계해충발전궤적설계수학모형。동시,이용삼유유한원연건진행분석。최후,설계병가공료일태7.5kW양궤,종시험결과래간,통과조절전려자전류,기극자통구유교호적조절특성,종이획득교저전압조정솔。
A novel hybrid excitation permanent magnet generator with adjustable air gap flux is investigated. The proposed structure and control principle are described in detail and design equations are completely derived. By using 3-D finite element analysis, the electromagnetic distribution and the performance evaluation are carried out. A 7.5kW prototype generator is manufactured and tested. The calculated data are compared with the experimental data, It is obvious that the proposed structure generator has good regulation characteristic by means of variation of dc field current.