太原理工大学学报
太原理工大學學報
태원리공대학학보
JOURNAL OF TAIYUAN UNIVERSITY OF TECHNOLOGY
2007年
2期
139-141
,共3页
荆秀娟%李万%闫济民%杨志康
荊秀娟%李萬%閆濟民%楊誌康
형수연%리만%염제민%양지강
可再分散性乳胶粉%喷雾干燥%平均粒径%堆积密度
可再分散性乳膠粉%噴霧榦燥%平均粒徑%堆積密度
가재분산성유효분%분무간조%평균립경%퇴적밀도
采用单因素实验方法,研究了喷雾干燥时喷雾液的粘度、进料量、雾化轮转速、干燥器进出口温度等因素对可再分散性乳胶粉性能指标的影响.结果表明:喷雾液的粘度为0.30~0.15Pa·s,进料泵频率27~30 Hz,雾化轮转速(2~3)×104 r/min,干燥塔进风温度150~200 ℃,出口温度90~100 ℃时,所得可再分散性乳胶粉外观均匀、固含量高、堆积密度大、平均粒径小、无结决现象,性能指标达到工业生产使用要求.该研究为可再分散性乳胶粉的生产及在建筑砂浆中的应用,提供了可靠的参考依据.
採用單因素實驗方法,研究瞭噴霧榦燥時噴霧液的粘度、進料量、霧化輪轉速、榦燥器進齣口溫度等因素對可再分散性乳膠粉性能指標的影響.結果錶明:噴霧液的粘度為0.30~0.15Pa·s,進料泵頻率27~30 Hz,霧化輪轉速(2~3)×104 r/min,榦燥塔進風溫度150~200 ℃,齣口溫度90~100 ℃時,所得可再分散性乳膠粉外觀均勻、固含量高、堆積密度大、平均粒徑小、無結決現象,性能指標達到工業生產使用要求.該研究為可再分散性乳膠粉的生產及在建築砂漿中的應用,提供瞭可靠的參攷依據.
채용단인소실험방법,연구료분무간조시분무액적점도、진료량、무화륜전속、간조기진출구온도등인소대가재분산성유효분성능지표적영향.결과표명:분무액적점도위0.30~0.15Pa·s,진료빙빈솔27~30 Hz,무화륜전속(2~3)×104 r/min,간조탑진풍온도150~200 ℃,출구온도90~100 ℃시,소득가재분산성유효분외관균균、고함량고、퇴적밀도대、평균립경소、무결결현상,성능지표체도공업생산사용요구.해연구위가재분산성유효분적생산급재건축사장중적응용,제공료가고적삼고의거.