无机盐工业
無機鹽工業
무궤염공업
INORGANIC CHEMICALS INDUSTRY
2010年
10期
15-18
,共4页
张亮%袁俊生%付云朋%于占花%朱孔秀
張亮%袁俊生%付雲朋%于佔花%硃孔秀
장량%원준생%부운붕%우점화%주공수
尖晶石型锰酸锂%离子筛%水热合成%锂%吸附性能
尖晶石型錳痠鋰%離子篩%水熱閤成%鋰%吸附性能
첨정석형맹산리%리자사%수열합성%리%흡부성능
采用水热合成法,以硝酸锰、氢氧化锂和过氧化氢为原料直接合成出前驱体--尖晶石型锰酸锂,再经酸浸脱锂后得到对锂离子具有选择吸附性能的离子筛.通过XRD和TEM对产物的晶相结构进行了表征,测定了离子筛材料对纯锂溶液和海水中锂的吸附容量,以及对海水中主要金属离子的选择性.结果表明,当n(锂)∶n(锰)=2.5,过氧化氢浓度为0.3 mol/L,在120 ℃下反应12 h时,产物几乎为纯的立方相锰酸锂晶体;前驱体晶体呈一维纳米线形态,直径为20 nm左右,长度在300~500 nm;离子筛对纯锂溶液中锂的最大吸附量达到40.23 mg/g,对海水中锂的吸附量为10.46 mg/g;离子筛对金属离子的选择吸附性顺序为:Li+≥ Ca2+> Mg2+> Na+> K+,锂的分配系数(Kd, Li)达到12 836.71 mL/g,表现出对锂很高的选择吸附性.
採用水熱閤成法,以硝痠錳、氫氧化鋰和過氧化氫為原料直接閤成齣前驅體--尖晶石型錳痠鋰,再經痠浸脫鋰後得到對鋰離子具有選擇吸附性能的離子篩.通過XRD和TEM對產物的晶相結構進行瞭錶徵,測定瞭離子篩材料對純鋰溶液和海水中鋰的吸附容量,以及對海水中主要金屬離子的選擇性.結果錶明,噹n(鋰)∶n(錳)=2.5,過氧化氫濃度為0.3 mol/L,在120 ℃下反應12 h時,產物幾乎為純的立方相錳痠鋰晶體;前驅體晶體呈一維納米線形態,直徑為20 nm左右,長度在300~500 nm;離子篩對純鋰溶液中鋰的最大吸附量達到40.23 mg/g,對海水中鋰的吸附量為10.46 mg/g;離子篩對金屬離子的選擇吸附性順序為:Li+≥ Ca2+> Mg2+> Na+> K+,鋰的分配繫數(Kd, Li)達到12 836.71 mL/g,錶現齣對鋰很高的選擇吸附性.
채용수열합성법,이초산맹、경양화리화과양화경위원료직접합성출전구체--첨정석형맹산리,재경산침탈리후득도대리리자구유선택흡부성능적리자사.통과XRD화TEM대산물적정상결구진행료표정,측정료리자사재료대순리용액화해수중리적흡부용량,이급대해수중주요금속리자적선택성.결과표명,당n(리)∶n(맹)=2.5,과양화경농도위0.3 mol/L,재120 ℃하반응12 h시,산물궤호위순적립방상맹산리정체;전구체정체정일유납미선형태,직경위20 nm좌우,장도재300~500 nm;리자사대순리용액중리적최대흡부량체도40.23 mg/g,대해수중리적흡부량위10.46 mg/g;리자사대금속리자적선택흡부성순서위:Li+≥ Ca2+> Mg2+> Na+> K+,리적분배계수(Kd, Li)체도12 836.71 mL/g,표현출대리흔고적선택흡부성.