材料导报
材料導報
재료도보
MATERIALS REVIEW
2012年
18期
148-152
,共5页
郭鹏伟%文喜星%周龙%唐林峰%王楠
郭鵬偉%文喜星%週龍%唐林峰%王楠
곽붕위%문희성%주룡%당림봉%왕남
激光熔凝%温度场%温度梯度%单晶合金
激光鎔凝%溫度場%溫度梯度%單晶閤金
격광용응%온도장%온도제도%단정합금
采用有限元法,模拟计算了激光表面熔凝单晶合金材料中的三维温度场分布,得到了材料表面及截面的温度梯度分布,为激光熔凝过程中CET转变及液固相变过程中温度梯度G的变化提供了理论依据.将材料热物性参数随温度的变化引入计算模型,并得到了其对计算结果的影响,为下一步残余应力的数值模拟做了预研准备.计算结果表明:随温度变化的材料的热物性参数对温度梯度G的影响较大;在单晶合金凝固过程中,材料内温度梯度G对CET转变起关键作用;模拟结果与实验测量结果吻合很好.
採用有限元法,模擬計算瞭激光錶麵鎔凝單晶閤金材料中的三維溫度場分佈,得到瞭材料錶麵及截麵的溫度梯度分佈,為激光鎔凝過程中CET轉變及液固相變過程中溫度梯度G的變化提供瞭理論依據.將材料熱物性參數隨溫度的變化引入計算模型,併得到瞭其對計算結果的影響,為下一步殘餘應力的數值模擬做瞭預研準備.計算結果錶明:隨溫度變化的材料的熱物性參數對溫度梯度G的影響較大;在單晶閤金凝固過程中,材料內溫度梯度G對CET轉變起關鍵作用;模擬結果與實驗測量結果吻閤很好.
채용유한원법,모의계산료격광표면용응단정합금재료중적삼유온도장분포,득도료재료표면급절면적온도제도분포,위격광용응과정중CET전변급액고상변과정중온도제도G적변화제공료이론의거.장재료열물성삼수수온도적변화인입계산모형,병득도료기대계산결과적영향,위하일보잔여응력적수치모의주료예연준비.계산결과표명:수온도변화적재료적열물성삼수대온도제도G적영향교대;재단정합금응고과정중,재료내온도제도G대CET전변기관건작용;모의결과여실험측량결과문합흔호.