金刚石与磨料磨具工程
金剛石與磨料磨具工程
금강석여마료마구공정
DIAMOND & ABRASIVES ENGINNERING
2006年
1期
36-38
,共3页
金刚石%生长梯度%金刚石性能
金剛石%生長梯度%金剛石性能
금강석%생장제도%금강석성능
本文旨在研究两面顶合成工艺中金刚石在生长阶段通过改变压力、功率梯度实现改变生长驱动力后对金刚石性能的影响,分析了相应的影响机理.在间接加热腔体结构中,金刚石生长过程采用两种压力、功率梯度进行合成,合成后对所得的样品进行了静压强度、冲击强度、表面形貌检测.结果表明:生长前期的压力和功率梯度增加两倍,生长后期梯度减缓,TTI和TI分别增加了10%.研究认为生长早期压力、功率大梯度(压力增幅大,功率降幅大)有利于提高晶体内部质量,生长后期压力、功率小梯度(压力增幅小,功率降幅小)有利于提高晶体外部质量.
本文旨在研究兩麵頂閤成工藝中金剛石在生長階段通過改變壓力、功率梯度實現改變生長驅動力後對金剛石性能的影響,分析瞭相應的影響機理.在間接加熱腔體結構中,金剛石生長過程採用兩種壓力、功率梯度進行閤成,閤成後對所得的樣品進行瞭靜壓彊度、遲擊彊度、錶麵形貌檢測.結果錶明:生長前期的壓力和功率梯度增加兩倍,生長後期梯度減緩,TTI和TI分彆增加瞭10%.研究認為生長早期壓力、功率大梯度(壓力增幅大,功率降幅大)有利于提高晶體內部質量,生長後期壓力、功率小梯度(壓力增幅小,功率降幅小)有利于提高晶體外部質量.
본문지재연구량면정합성공예중금강석재생장계단통과개변압력、공솔제도실현개변생장구동력후대금강석성능적영향,분석료상응적영향궤리.재간접가열강체결구중,금강석생장과정채용량충압력、공솔제도진행합성,합성후대소득적양품진행료정압강도、충격강도、표면형모검측.결과표명:생장전기적압력화공솔제도증가량배,생장후기제도감완,TTI화TI분별증가료10%.연구인위생장조기압력、공솔대제도(압력증폭대,공솔강폭대)유리우제고정체내부질량,생장후기압력、공솔소제도(압력증폭소,공솔강폭소)유리우제고정체외부질량.