材料热处理学报
材料熱處理學報
재료열처이학보
TRANSACTIONS OF MATERIALS AND HEAT TREATMENT
2006年
1期
75-78
,共4页
常代展%杨王玥%张来启%颜永根
常代展%楊王玥%張來啟%顏永根
상대전%양왕모%장래계%안영근
爆炸喷涂%CoNiCrAlY-AL2O3涂层%组织结构%高温磨损%乙炔氧气流量比
爆炸噴塗%CoNiCrAlY-AL2O3塗層%組織結構%高溫磨損%乙炔氧氣流量比
폭작분도%CoNiCrAlY-AL2O3도층%조직결구%고온마손%을결양기류량비
采用三种爆炸喷涂工艺在SCH19耐热钢基体上制备CoNiCrAlY-Al2O3高温耐磨涂层,借助XRD、SEM和EDS等技术对涂层的组织结构进行分析,并检测涂层的表面粗糙度、显微硬度和高温磨损失重.结果表明,涂层由γ-Ni(Co,Cr)、γ'-Ni3Al和α-AL2O3组成,涂层呈典型的层状结构,适当提高乙炔氧气流量比,可改善涂层的组织结构,并且使其在900℃的高温下具有更优异的耐磨性能.
採用三種爆炸噴塗工藝在SCH19耐熱鋼基體上製備CoNiCrAlY-Al2O3高溫耐磨塗層,藉助XRD、SEM和EDS等技術對塗層的組織結構進行分析,併檢測塗層的錶麵粗糙度、顯微硬度和高溫磨損失重.結果錶明,塗層由γ-Ni(Co,Cr)、γ'-Ni3Al和α-AL2O3組成,塗層呈典型的層狀結構,適噹提高乙炔氧氣流量比,可改善塗層的組織結構,併且使其在900℃的高溫下具有更優異的耐磨性能.
채용삼충폭작분도공예재SCH19내열강기체상제비CoNiCrAlY-Al2O3고온내마도층,차조XRD、SEM화EDS등기술대도층적조직결구진행분석,병검측도층적표면조조도、현미경도화고온마손실중.결과표명,도층유γ-Ni(Co,Cr)、γ'-Ni3Al화α-AL2O3조성,도층정전형적층상결구,괄당제고을결양기류량비,가개선도층적조직결구,병차사기재900℃적고온하구유경우이적내마성능.