清华大学学报(自然科学版)
清華大學學報(自然科學版)
청화대학학보(자연과학판)
Journal of Tsinghua University
2003年
5期
669-672
,共4页
陈艳秋%李琳%范钦珊%殷雅俊
陳豔鞦%李琳%範欽珊%慇雅俊
진염추%리림%범흠산%은아준
线性振动%直接分支模态综合法%子结构%剩余模态%ANSYS
線性振動%直接分支模態綜閤法%子結構%剩餘模態%ANSYS
선성진동%직접분지모태종합법%자결구%잉여모태%ANSYS
介绍了直接分支模态综合法的基本原理并通过算例对算法进行验算,分析了该方法计算结果很不准确的原因并进行了改进.改进的分支模态法将系统中主子结构的剩余模态加入,降低了略去高阶模态带来的严重误差.计算结果与有限元软件ANSYS的计算结果吻合较好,误差小于2%. 改进的方法不仅使计算结果准确,而且保持了原方法的优点,适用于工程计算.
介紹瞭直接分支模態綜閤法的基本原理併通過算例對算法進行驗算,分析瞭該方法計算結果很不準確的原因併進行瞭改進.改進的分支模態法將繫統中主子結構的剩餘模態加入,降低瞭略去高階模態帶來的嚴重誤差.計算結果與有限元軟件ANSYS的計算結果吻閤較好,誤差小于2%. 改進的方法不僅使計算結果準確,而且保持瞭原方法的優點,適用于工程計算.
개소료직접분지모태종합법적기본원리병통과산례대산법진행험산,분석료해방법계산결과흔불준학적원인병진행료개진.개진적분지모태법장계통중주자결구적잉여모태가입,강저료략거고계모태대래적엄중오차.계산결과여유한원연건ANSYS적계산결과문합교호,오차소우2%. 개진적방법불부사계산결과준학,이차보지료원방법적우점,괄용우공정계산.