机械工程学报
機械工程學報
궤계공정학보
CHINESE JOURNAL OF MECHANICAL ENGINEERING
2012年
8期
28-33
,共6页
赵军%曹宏强%展培培%马瑞
趙軍%曹宏彊%展培培%馬瑞
조군%조굉강%전배배%마서
平面曲梁%过弯矫直%三点弯曲%四点弯曲
平麵麯樑%過彎矯直%三點彎麯%四點彎麯
평면곡량%과만교직%삼점만곡%사점만곡
矫直是大口径埋弧直缝焊管生产过程中处理直线度不达标管件的关键性技术,研究矫直过程中的变形规律是合理确定矫直工艺参数的理论基础.根据矫直过程中弯曲小变形的特点,提出初始当量应变的概念,借此建立平面曲梁初始曲率分布与应变分布之间的联系.基于弹塑性小变形纯弯曲工程基本假设,导出平面曲梁小变形反向纯弯曲的几何方程和弹复方程,进而理论上论证曲梁过弯矫直与直梁纯弯曲之间的等价关系,从而给出过弯矫直等价原理,即曲梁矫直所需弯矩载荷与同材质、同形状的直梁弯曲成待矫曲梁形状所需载荷的等价关系.用三点弯曲和四点弯曲及其反向弯曲试验证实过弯矫直等价原理的正确性,为过弯矫直工艺方案和控制策略的确定奠定了理论和试验基础.
矯直是大口徑埋弧直縫銲管生產過程中處理直線度不達標管件的關鍵性技術,研究矯直過程中的變形規律是閤理確定矯直工藝參數的理論基礎.根據矯直過程中彎麯小變形的特點,提齣初始噹量應變的概唸,藉此建立平麵麯樑初始麯率分佈與應變分佈之間的聯繫.基于彈塑性小變形純彎麯工程基本假設,導齣平麵麯樑小變形反嚮純彎麯的幾何方程和彈複方程,進而理論上論證麯樑過彎矯直與直樑純彎麯之間的等價關繫,從而給齣過彎矯直等價原理,即麯樑矯直所需彎矩載荷與同材質、同形狀的直樑彎麯成待矯麯樑形狀所需載荷的等價關繫.用三點彎麯和四點彎麯及其反嚮彎麯試驗證實過彎矯直等價原理的正確性,為過彎矯直工藝方案和控製策略的確定奠定瞭理論和試驗基礎.
교직시대구경매호직봉한관생산과정중처리직선도불체표관건적관건성기술,연구교직과정중적변형규률시합리학정교직공예삼수적이론기출.근거교직과정중만곡소변형적특점,제출초시당량응변적개념,차차건립평면곡량초시곡솔분포여응변분포지간적련계.기우탄소성소변형순만곡공정기본가설,도출평면곡량소변형반향순만곡적궤하방정화탄복방정,진이이론상론증곡량과만교직여직량순만곡지간적등개관계,종이급출과만교직등개원리,즉곡량교직소수만구재하여동재질、동형상적직량만곡성대교곡량형상소수재하적등개관계.용삼점만곡화사점만곡급기반향만곡시험증실과만교직등개원리적정학성,위과만교직공예방안화공제책략적학정전정료이론화시험기출.