化学工程
化學工程
화학공정
CHEMICAL ENGINEERING
2011年
10期
63-67
,共5页
液固流化床%颗粒浓度%液相速度%瞬间变化%数学模型
液固流化床%顆粒濃度%液相速度%瞬間變化%數學模型
액고류화상%과립농도%액상속도%순간변화%수학모형
在液速陡变时,分别考察了铅直管液固流化床内粒径为225 μm和511 μm的玻璃微珠的体积分数分布随时间变化的规律,发现大小颗粒在不同的液速变化幅度下都呈现出同样的体积分数变化趋势.联立颗粒速度和颗粒的连续方程式模拟颗粒的体积分数变化过程,建立了一个相对简单的颗粒体积分数变化的数学模型.在模型中,用定常状态的空隙率方程式计算的颗粒速度来体现液相的波动,将变化过程中颗粒的轴向扩散系数当作不变的常数,只与变化前后的空塔液速和粒径有关.模拟结果与实验数据有很好的一致性,尤其在粒径较小、液速变化幅度不大时,预测的准确性更高.
在液速陡變時,分彆攷察瞭鉛直管液固流化床內粒徑為225 μm和511 μm的玻璃微珠的體積分數分佈隨時間變化的規律,髮現大小顆粒在不同的液速變化幅度下都呈現齣同樣的體積分數變化趨勢.聯立顆粒速度和顆粒的連續方程式模擬顆粒的體積分數變化過程,建立瞭一箇相對簡單的顆粒體積分數變化的數學模型.在模型中,用定常狀態的空隙率方程式計算的顆粒速度來體現液相的波動,將變化過程中顆粒的軸嚮擴散繫數噹作不變的常數,隻與變化前後的空塔液速和粒徑有關.模擬結果與實驗數據有很好的一緻性,尤其在粒徑較小、液速變化幅度不大時,預測的準確性更高.
재액속두변시,분별고찰료연직관액고류화상내립경위225 μm화511 μm적파리미주적체적분수분포수시간변화적규률,발현대소과립재불동적액속변화폭도하도정현출동양적체적분수변화추세.련립과립속도화과립적련속방정식모의과립적체적분수변화과정,건립료일개상대간단적과립체적분수변화적수학모형.재모형중,용정상상태적공극솔방정식계산적과립속도래체현액상적파동,장변화과정중과립적축향확산계수당작불변적상수,지여변화전후적공탑액속화립경유관.모의결과여실험수거유흔호적일치성,우기재립경교소、액속변화폭도불대시,예측적준학성경고.