材料科学与工程学报
材料科學與工程學報
재료과학여공정학보
MATERIALS SCIENCE AND ENGINEERING
2004年
2期
284-287
,共4页
徐振佩%任晓燕%丛伟艳%郁黎明%钟敏建%张正明%张金仓%何正明
徐振珮%任曉燕%叢偉豔%鬱黎明%鐘敏建%張正明%張金倉%何正明
서진패%임효연%총위염%욱려명%종민건%장정명%장금창%하정명
溶胶凝胶自燃%球磨%比饱和磁化强度%尖晶石
溶膠凝膠自燃%毬磨%比飽和磁化彊度%尖晶石
용효응효자연%구마%비포화자화강도%첨정석
以金属硝酸盐和柠檬酸为原料,用溶胶凝胶自燃烧法制备NiZn系铁氧体前驱体粉末(Ni0.4Zn0.6Fe2O4,Ni0.2Zn0.6Cu0.2Fe2O4,Ni0.33Zn0.59Cu0.11Fe1.97O4(Bi2O3)0.002和Ni0.33Zn0.59Cu0.11 Fe1.97O4(Bi2O3)0.002(MnO2)0.02),然后经30小时高能球磨,从X-ray衍射谱中发现前驱体粉末虽然基本上是尖晶石结构,但是还有一些杂相,经过球磨,杂相明显减少,结构更加完整,颗粒减小.前驱体粉末Ni0.33Zn0.59Cu0.11Fe1.97O4(Bi2O3)0.002经30小时球磨后,在空气中退火,退火温度分别为400℃,600℃,800℃,900℃,1000℃.用X-ray衍射谱分析其物相,发现在800℃退火得到单相的尖晶石结构,无杂相.该样品的最佳退火温度低于1000℃.用振动样品磁强计分别测量制备态和退火态样品粉末的磁性,可以看出,随退火温度的升高,比饱和磁化强度σs逐渐增大,矫顽力Hc逐渐减小,当900℃退火后,比饱和磁化强度已接近块状NiZn系铁氧体.1000℃退火后,上述四种样品中Ni0.4Zn0.6Fe2O4具有最高的比饱和磁化强度σs=65.09emu/g.本文为NiZn铁氧体的低温烧结提供了有用的实验数据.
以金屬硝痠鹽和檸檬痠為原料,用溶膠凝膠自燃燒法製備NiZn繫鐵氧體前驅體粉末(Ni0.4Zn0.6Fe2O4,Ni0.2Zn0.6Cu0.2Fe2O4,Ni0.33Zn0.59Cu0.11Fe1.97O4(Bi2O3)0.002和Ni0.33Zn0.59Cu0.11 Fe1.97O4(Bi2O3)0.002(MnO2)0.02),然後經30小時高能毬磨,從X-ray衍射譜中髮現前驅體粉末雖然基本上是尖晶石結構,但是還有一些雜相,經過毬磨,雜相明顯減少,結構更加完整,顆粒減小.前驅體粉末Ni0.33Zn0.59Cu0.11Fe1.97O4(Bi2O3)0.002經30小時毬磨後,在空氣中退火,退火溫度分彆為400℃,600℃,800℃,900℃,1000℃.用X-ray衍射譜分析其物相,髮現在800℃退火得到單相的尖晶石結構,無雜相.該樣品的最佳退火溫度低于1000℃.用振動樣品磁彊計分彆測量製備態和退火態樣品粉末的磁性,可以看齣,隨退火溫度的升高,比飽和磁化彊度σs逐漸增大,矯頑力Hc逐漸減小,噹900℃退火後,比飽和磁化彊度已接近塊狀NiZn繫鐵氧體.1000℃退火後,上述四種樣品中Ni0.4Zn0.6Fe2O4具有最高的比飽和磁化彊度σs=65.09emu/g.本文為NiZn鐵氧體的低溫燒結提供瞭有用的實驗數據.
이금속초산염화저몽산위원료,용용효응효자연소법제비NiZn계철양체전구체분말(Ni0.4Zn0.6Fe2O4,Ni0.2Zn0.6Cu0.2Fe2O4,Ni0.33Zn0.59Cu0.11Fe1.97O4(Bi2O3)0.002화Ni0.33Zn0.59Cu0.11 Fe1.97O4(Bi2O3)0.002(MnO2)0.02),연후경30소시고능구마,종X-ray연사보중발현전구체분말수연기본상시첨정석결구,단시환유일사잡상,경과구마,잡상명현감소,결구경가완정,과립감소.전구체분말Ni0.33Zn0.59Cu0.11Fe1.97O4(Bi2O3)0.002경30소시구마후,재공기중퇴화,퇴화온도분별위400℃,600℃,800℃,900℃,1000℃.용X-ray연사보분석기물상,발현재800℃퇴화득도단상적첨정석결구,무잡상.해양품적최가퇴화온도저우1000℃.용진동양품자강계분별측량제비태화퇴화태양품분말적자성,가이간출,수퇴화온도적승고,비포화자화강도σs축점증대,교완력Hc축점감소,당900℃퇴화후,비포화자화강도이접근괴상NiZn계철양체.1000℃퇴화후,상술사충양품중Ni0.4Zn0.6Fe2O4구유최고적비포화자화강도σs=65.09emu/g.본문위NiZn철양체적저온소결제공료유용적실험수거.