粉末冶金技术
粉末冶金技術
분말야금기술
POWDER METALLURGY TECHNOLOGY
2005年
3期
168-171
,共4页
刘金状%段辉平%李树杰%陈志军
劉金狀%段輝平%李樹傑%陳誌軍
류금상%단휘평%리수걸%진지군
石墨%润湿性%接触角%界面
石墨%潤濕性%接觸角%界麵
석묵%윤습성%접촉각%계면
陶瓷/金属润湿性研究对于陶瓷-金属连接以及金属陶瓷复合材料的制取有重要意义.采用座滴法研究了石墨/Ni+Ti体系的润湿性.测定了不同成分的焊料与石墨基体的接触角,并研究了界面结构和成分.1340℃时,在真空中石墨/Ni平衡接触角为78°,保温时间对接触角没有显著影响.添加剂Ti的质量分数达到40%后,能显著改善润湿性,在这种情况下,接触角随保温时间延长而减小.润湿界面存在明显的元素互扩散现象.
陶瓷/金屬潤濕性研究對于陶瓷-金屬連接以及金屬陶瓷複閤材料的製取有重要意義.採用座滴法研究瞭石墨/Ni+Ti體繫的潤濕性.測定瞭不同成分的銲料與石墨基體的接觸角,併研究瞭界麵結構和成分.1340℃時,在真空中石墨/Ni平衡接觸角為78°,保溫時間對接觸角沒有顯著影響.添加劑Ti的質量分數達到40%後,能顯著改善潤濕性,在這種情況下,接觸角隨保溫時間延長而減小.潤濕界麵存在明顯的元素互擴散現象.
도자/금속윤습성연구대우도자-금속련접이급금속도자복합재료적제취유중요의의.채용좌적법연구료석묵/Ni+Ti체계적윤습성.측정료불동성분적한료여석묵기체적접촉각,병연구료계면결구화성분.1340℃시,재진공중석묵/Ni평형접촉각위78°,보온시간대접촉각몰유현저영향.첨가제Ti적질량분수체도40%후,능현저개선윤습성,재저충정황하,접촉각수보온시간연장이감소.윤습계면존재명현적원소호확산현상.