中南大学学报(自然科学版)
中南大學學報(自然科學版)
중남대학학보(자연과학판)
JOURNAL OF CENTRAL SOUTH UNIVERSITY
2009年
2期
411-416
,共6页
42CrMo钢%静态再结晶%静态软化%双道次热压缩试验
42CrMo鋼%靜態再結晶%靜態軟化%雙道次熱壓縮試驗
42CrMo강%정태재결정%정태연화%쌍도차열압축시험
利用双道次热压缩的方法,在Gleeble-1500热模拟实验机上研究42CrMo钢在高温变形道次间隔时间内的静态软化行为.讨论变形温度、应变速率、变形程度与初始奥氏体晶粒尺寸对其静态再结晶行为的影响.根据实验结果,建立42CrMo钢静态再结晶动力学模型,相应的静态再结晶激活能约为187.68 kJ/mol.结果表明:变形程度对42CrMo钢的静态再结晶影响最大,变形温度和应变速率次之,初始奥氏体晶粒尺寸对其影响较小;在变形温度较低(850 ℃)时,随着道次间隔时间的增加,静态再结晶分数逐渐趋于稳定(约为0.4),这是因为在变形温度较低时,道次间不能发生完全的静态再结晶.在变形程度较小、道次间隔时间较短时,几乎不发生静态再结晶.将静态再结晶动力学模型的预测结果与实验结果进行比较,二者较吻合.
利用雙道次熱壓縮的方法,在Gleeble-1500熱模擬實驗機上研究42CrMo鋼在高溫變形道次間隔時間內的靜態軟化行為.討論變形溫度、應變速率、變形程度與初始奧氏體晶粒呎吋對其靜態再結晶行為的影響.根據實驗結果,建立42CrMo鋼靜態再結晶動力學模型,相應的靜態再結晶激活能約為187.68 kJ/mol.結果錶明:變形程度對42CrMo鋼的靜態再結晶影響最大,變形溫度和應變速率次之,初始奧氏體晶粒呎吋對其影響較小;在變形溫度較低(850 ℃)時,隨著道次間隔時間的增加,靜態再結晶分數逐漸趨于穩定(約為0.4),這是因為在變形溫度較低時,道次間不能髮生完全的靜態再結晶.在變形程度較小、道次間隔時間較短時,幾乎不髮生靜態再結晶.將靜態再結晶動力學模型的預測結果與實驗結果進行比較,二者較吻閤.
이용쌍도차열압축적방법,재Gleeble-1500열모의실험궤상연구42CrMo강재고온변형도차간격시간내적정태연화행위.토론변형온도、응변속솔、변형정도여초시오씨체정립척촌대기정태재결정행위적영향.근거실험결과,건립42CrMo강정태재결정동역학모형,상응적정태재결정격활능약위187.68 kJ/mol.결과표명:변형정도대42CrMo강적정태재결정영향최대,변형온도화응변속솔차지,초시오씨체정립척촌대기영향교소;재변형온도교저(850 ℃)시,수착도차간격시간적증가,정태재결정분수축점추우은정(약위0.4),저시인위재변형온도교저시,도차간불능발생완전적정태재결정.재변형정도교소、도차간격시간교단시,궤호불발생정태재결정.장정태재결정동역학모형적예측결과여실험결과진행비교,이자교문합.