激光与红外
激光與紅外
격광여홍외
LASER & INFRARED
2010年
1期
91-94
,共4页
李美萱%杨永亮%付秀华%朱筱茵
李美萱%楊永亮%付秀華%硃篠茵
리미훤%양영량%부수화%주소인
光学薄膜%光纤增透膜%真空镀膜%离子辅助沉积
光學薄膜%光纖增透膜%真空鍍膜%離子輔助沉積
광학박막%광섬증투막%진공도막%리자보조침적
optical thin film%fiber AR coating%vacuum coating%ion assistant deposition
针对导弹探测制导光源的特殊应用,通过对材料的选择、膜系的设计和工艺参数的优化,采用电子束真空镀膜及离子辅助沉积的方法,成功的在光纤端面为50 μm的口径上镀制减反射膜.研究了膜层的应力匹配和低温镀膜时膜层的牢固性,并给出了光纤端面测试前后结果的实例对比图和曲线.在以YAG激光器为光源的系统中,当激光器的工作电流为2000 mA时,光纤的输出功率比未镀膜时提高了5%,能够承受激光光源的照射和恶劣的环境测试,达到了使用要求.
針對導彈探測製導光源的特殊應用,通過對材料的選擇、膜繫的設計和工藝參數的優化,採用電子束真空鍍膜及離子輔助沉積的方法,成功的在光纖耑麵為50 μm的口徑上鍍製減反射膜.研究瞭膜層的應力匹配和低溫鍍膜時膜層的牢固性,併給齣瞭光纖耑麵測試前後結果的實例對比圖和麯線.在以YAG激光器為光源的繫統中,噹激光器的工作電流為2000 mA時,光纖的輸齣功率比未鍍膜時提高瞭5%,能夠承受激光光源的照射和噁劣的環境測試,達到瞭使用要求.
침대도탄탐측제도광원적특수응용,통과대재료적선택、막계적설계화공예삼수적우화,채용전자속진공도막급리자보조침적적방법,성공적재광섬단면위50 μm적구경상도제감반사막.연구료막층적응력필배화저온도막시막층적뢰고성,병급출료광섬단면측시전후결과적실례대비도화곡선.재이YAG격광기위광원적계통중,당격광기적공작전류위2000 mA시,광섬적수출공솔비미도막시제고료5%,능구승수격광광원적조사화악렬적배경측시,체도료사용요구.
Aiming at the special application of light source for missile detection and guiding for,by materials choosing,film designing and process parameters optimization,using electron-beam vacuum coating and ion-assisted deposition technique,the anti-reflective film is plated successfully on the optical fiber end whose diameter is 50 μm.By studying the film stress matching and the film fastness when low-temperature coating,and the examples comparison charts and transmittance curves were given before and after fiber end coating.In the system which light source is YAG laser,when the laser's operating current is 2000 mA,the fiber power is improved by 5% compared with the un-coating fiber;the fiber can withstand the irradiation of laser sources and the poor environmental testing,reaching to the using requirements.