云南冶金
雲南冶金
운남야금
YUNNAN METALLURGY
2011年
6期
20-22,26
,共4页
磨矿%过粉碎%铸铁段%粒级%目
磨礦%過粉碎%鑄鐵段%粒級%目
마광%과분쇄%주철단%립급%목
从磨矿工艺入手,针对矿石的特殊力学性质采用特殊的磨矿新工艺,具体就是采用介质尺寸精确及选择破碎作用强的选择性磨矿新工艺,降低过磨过粉碎,降低磨矿产品中- 500目粒级的含量,使磨矿产品尽量满足选矿的条件,有利于矿石分选.结合会泽采选厂工业试验情况进行实例分析,从而验证上述结论的合理性.
從磨礦工藝入手,針對礦石的特殊力學性質採用特殊的磨礦新工藝,具體就是採用介質呎吋精確及選擇破碎作用彊的選擇性磨礦新工藝,降低過磨過粉碎,降低磨礦產品中- 500目粒級的含量,使磨礦產品儘量滿足選礦的條件,有利于礦石分選.結閤會澤採選廠工業試驗情況進行實例分析,從而驗證上述結論的閤理性.
종마광공예입수,침대광석적특수역학성질채용특수적마광신공예,구체취시채용개질척촌정학급선택파쇄작용강적선택성마광신공예,강저과마과분쇄,강저마광산품중- 500목립급적함량,사마광산품진량만족선광적조건,유리우광석분선.결합회택채선엄공업시험정황진행실례분석,종이험증상술결론적합이성.