稀有金属材料与工程
稀有金屬材料與工程
희유금속재료여공정
RARE METAL MATERIALS AND ENGINEERNG
2007年
z3期
131-133
,共3页
杜向鹏%刘洪伟%郭成%陈永甲%赵利军
杜嚮鵬%劉洪偉%郭成%陳永甲%趙利軍
두향붕%류홍위%곽성%진영갑%조리군
双金属复层材料%界面能量释放率%四点弯曲%界面断裂韧性
雙金屬複層材料%界麵能量釋放率%四點彎麯%界麵斷裂韌性
쌍금속복층재료%계면능량석방솔%사점만곡%계면단렬인성
采用四点弯曲的试验研究方法,对爆炸焊接不锈钢-铝复层材料界面断裂性能进行了研究,采用扫描电子显微镜对界面裂纹与断口形貌进行观察分析.研究结果表明:采用爆炸焊接工艺可以达到不锈钢-铝复层板的良好结合,以界面能量释放率作为界面断裂韧性的评价指标,其平均值为1.725 Mpa·m.界面断口可以观察到清晰的爆炸焊接波纹痕迹,并且有微观裂纹的存在,界面断裂整体倾向于脆性断裂.
採用四點彎麯的試驗研究方法,對爆炸銲接不鏽鋼-鋁複層材料界麵斷裂性能進行瞭研究,採用掃描電子顯微鏡對界麵裂紋與斷口形貌進行觀察分析.研究結果錶明:採用爆炸銲接工藝可以達到不鏽鋼-鋁複層闆的良好結閤,以界麵能量釋放率作為界麵斷裂韌性的評價指標,其平均值為1.725 Mpa·m.界麵斷口可以觀察到清晰的爆炸銲接波紋痕跡,併且有微觀裂紋的存在,界麵斷裂整體傾嚮于脆性斷裂.
채용사점만곡적시험연구방법,대폭작한접불수강-려복층재료계면단렬성능진행료연구,채용소묘전자현미경대계면렬문여단구형모진행관찰분석.연구결과표명:채용폭작한접공예가이체도불수강-려복층판적량호결합,이계면능량석방솔작위계면단렬인성적평개지표,기평균치위1.725 Mpa·m.계면단구가이관찰도청석적폭작한접파문흔적,병차유미관렬문적존재,계면단렬정체경향우취성단렬.