沈阳工业学院学报
瀋暘工業學院學報
침양공업학원학보
JOURNAL OF SHENYANG INTITUTE OF TECHNOLOGY
2001年
1期
61-66
,共6页
晶粒长大%蒙特卡罗方法%拓扑学
晶粒長大%矇特卡囉方法%拓撲學
정립장대%몽특잡라방법%탁복학
叙述了Monte Carlo(MC)模拟方法并在二维坐标中用300×300个六边形晶格点元素模拟了晶粒长大的过程,获得了晶粒长大动力学和拓扑学方面的重要信息,并计算出晶粒长大的动力学常数η=0.48.模拟结果揭示了MC方法在模拟微观组织过程中的重要作用.探讨了MC方法的特点:它抓住简单性与复杂性这一主要矛盾,从局部规则出发,体现整体演变之效应,文中还概述了MC模拟方法在材料加工过程中的应用情况.
敘述瞭Monte Carlo(MC)模擬方法併在二維坐標中用300×300箇六邊形晶格點元素模擬瞭晶粒長大的過程,穫得瞭晶粒長大動力學和拓撲學方麵的重要信息,併計算齣晶粒長大的動力學常數η=0.48.模擬結果揭示瞭MC方法在模擬微觀組織過程中的重要作用.探討瞭MC方法的特點:它抓住簡單性與複雜性這一主要矛盾,從跼部規則齣髮,體現整體縯變之效應,文中還概述瞭MC模擬方法在材料加工過程中的應用情況.
서술료Monte Carlo(MC)모의방법병재이유좌표중용300×300개륙변형정격점원소모의료정립장대적과정,획득료정립장대동역학화탁복학방면적중요신식,병계산출정립장대적동역학상수η=0.48.모의결과게시료MC방법재모의미관조직과정중적중요작용.탐토료MC방법적특점:타조주간단성여복잡성저일주요모순,종국부규칙출발,체현정체연변지효응,문중환개술료MC모의방법재재료가공과정중적응용정황.
This paper describes the Monte Carlo simulation of grain growth in two-dimensional matrix.The simulation is carry out in two-dimensional matrix with 300×300 hexagonal lattices in order to obtain the grain growth kinetics and topological evolution.The grain growth dynamics constant is calculated to be n=0.48.The simulated result shows the application of Monte Carlo techniques in the evolution of microstructure.The characteristic of Monte Carlo method is investigated philosophically.The self-contradiction of simplicity and complexity is dealt with presenting the whole evolution effect from start of locol rule.The application of MC on the simulation of material processing is described.