压电与声光
壓電與聲光
압전여성광
PIEZOELECTRICS & ACOUSTOOPTICS
2001年
6期
490-492
,共3页
吴胜举%王志刚%任金莲%刘纯荣
吳勝舉%王誌剛%任金蓮%劉純榮
오성거%왕지강%임금련%류순영
功率超声%超声雾化%金属粉末
功率超聲%超聲霧化%金屬粉末
공솔초성%초성무화%금속분말
金属粉末的制备是粉末冶金的关键,等离子旋转电极法,是现代工业上采用的离心雾化法制取金属粉末的主要方法之一,但存在着待雾化金属棒需要高速电机及其运动高速旋转棒的机构,而且,制取的粉末粒度较大.文章介绍了采用功率超声振动能量制取超细金属粉末的超声雾化法,提出了超声换能器振动系统、等离子枪、阳极喷咀、阴极及其最佳尺寸和工作参数,给出的实验结果表明,用文章中所述方法制取的钛金属粉末平均粒度约100 μm,小于180μm的粉末占84.0%,小于125 μm的粉末占63.7%,而用等离子旋转电极法制取的粉末粒度分别占19.5%和11.7%,在粒度方面优于等离子旋转电极法.
金屬粉末的製備是粉末冶金的關鍵,等離子鏇轉電極法,是現代工業上採用的離心霧化法製取金屬粉末的主要方法之一,但存在著待霧化金屬棒需要高速電機及其運動高速鏇轉棒的機構,而且,製取的粉末粒度較大.文章介紹瞭採用功率超聲振動能量製取超細金屬粉末的超聲霧化法,提齣瞭超聲換能器振動繫統、等離子鎗、暘極噴咀、陰極及其最佳呎吋和工作參數,給齣的實驗結果錶明,用文章中所述方法製取的鈦金屬粉末平均粒度約100 μm,小于180μm的粉末佔84.0%,小于125 μm的粉末佔63.7%,而用等離子鏇轉電極法製取的粉末粒度分彆佔19.5%和11.7%,在粒度方麵優于等離子鏇轉電極法.
금속분말적제비시분말야금적관건,등리자선전전겁법,시현대공업상채용적리심무화법제취금속분말적주요방법지일,단존재착대무화금속봉수요고속전궤급기운동고속선전봉적궤구,이차,제취적분말립도교대.문장개소료채용공솔초성진동능량제취초세금속분말적초성무화법,제출료초성환능기진동계통、등리자창、양겁분저、음겁급기최가척촌화공작삼수,급출적실험결과표명,용문장중소술방법제취적태금속분말평균립도약100 μm,소우180μm적분말점84.0%,소우125 μm적분말점63.7%,이용등리자선전전겁법제취적분말립도분별점19.5%화11.7%,재립도방면우우등리자선전전겁법.