云南冶金
雲南冶金
운남야금
YUNNAN METALLURGY
2011年
1期
31-34,39
,共5页
磁选%焙烧%摇床%褐铁矿
磁選%焙燒%搖床%褐鐵礦
자선%배소%요상%갈철광
主要对广西某褐铁矿进行选矿试验研究,针对该矿石铁品位相对较高,含S、P成分少的性质,采用了单-重选、磁选及氧化焙烧-强磁选和还原焙烧-弱磁选工艺进行了试验研究.结果表明,采用单-摇床重选或强磁选,精矿铁品位和回收率都低,选别效果较差;采用氧化焙烧-强磁选工艺,氧化焙烧可以把原矿品位提高到57%,强磁选对提高矿石品位效果较差;采用还原焙烧-弱磁选工艺效果较好,可获得品位为59.77%、回收率为77.24%铁精矿.
主要對廣西某褐鐵礦進行選礦試驗研究,針對該礦石鐵品位相對較高,含S、P成分少的性質,採用瞭單-重選、磁選及氧化焙燒-彊磁選和還原焙燒-弱磁選工藝進行瞭試驗研究.結果錶明,採用單-搖床重選或彊磁選,精礦鐵品位和迴收率都低,選彆效果較差;採用氧化焙燒-彊磁選工藝,氧化焙燒可以把原礦品位提高到57%,彊磁選對提高礦石品位效果較差;採用還原焙燒-弱磁選工藝效果較好,可穫得品位為59.77%、迴收率為77.24%鐵精礦.
주요대엄서모갈철광진행선광시험연구,침대해광석철품위상대교고,함S、P성분소적성질,채용료단-중선、자선급양화배소-강자선화환원배소-약자선공예진행료시험연구.결과표명,채용단-요상중선혹강자선,정광철품위화회수솔도저,선별효과교차;채용양화배소-강자선공예,양화배소가이파원광품위제고도57%,강자선대제고광석품위효과교차;채용환원배소-약자선공예효과교호,가획득품위위59.77%、회수솔위77.24%철정광.