机械设计与制造
機械設計與製造
궤계설계여제조
MACHINERY DESIGN & MANUFACTURE
2011年
12期
109-111
,共3页
刘建芳%王文成%李晓韬%孙威%聂彩霞%谷峰春
劉建芳%王文成%李曉韜%孫威%聶綵霞%穀峰春
류건방%왕문성%리효도%손위%섭채하%곡봉춘
后视镜%压电驱动%除雨%椭圆运动
後視鏡%壓電驅動%除雨%橢圓運動
후시경%압전구동%제우%타원운동
为了解决汽车后视镜雨天视线模糊的问题,提出了一种利用压电振子作为驱动源的汽车后视镜除雨器,设计了除雨器的结构,建立了其有限元模型,并对其整体和关键部件压电振子进行了仿真分析.制作了样机,并对影响后视镜除雨效果的镜面振幅变化规律进行了测试,测试了在对称波正弦波作用下振幅随频率、电压幅值的变化情况.另外,还对除雨效果与Z型振子的角度的关系进行了试验.仿真和试验结果表明,镜面振幅在谐振频率处得到最优除雨效果;镜面振幅随电压增大而增大;除雨器的除雨效果随Z型振子角度增大先增大后减小,当Z型振子角度为60°时除雨效果最佳.
為瞭解決汽車後視鏡雨天視線模糊的問題,提齣瞭一種利用壓電振子作為驅動源的汽車後視鏡除雨器,設計瞭除雨器的結構,建立瞭其有限元模型,併對其整體和關鍵部件壓電振子進行瞭倣真分析.製作瞭樣機,併對影響後視鏡除雨效果的鏡麵振幅變化規律進行瞭測試,測試瞭在對稱波正絃波作用下振幅隨頻率、電壓幅值的變化情況.另外,還對除雨效果與Z型振子的角度的關繫進行瞭試驗.倣真和試驗結果錶明,鏡麵振幅在諧振頻率處得到最優除雨效果;鏡麵振幅隨電壓增大而增大;除雨器的除雨效果隨Z型振子角度增大先增大後減小,噹Z型振子角度為60°時除雨效果最佳.
위료해결기차후시경우천시선모호적문제,제출료일충이용압전진자작위구동원적기차후시경제우기,설계료제우기적결구,건립료기유한원모형,병대기정체화관건부건압전진자진행료방진분석.제작료양궤,병대영향후시경제우효과적경면진폭변화규률진행료측시,측시료재대칭파정현파작용하진폭수빈솔、전압폭치적변화정황.령외,환대제우효과여Z형진자적각도적관계진행료시험.방진화시험결과표명,경면진폭재해진빈솔처득도최우제우효과;경면진폭수전압증대이증대;제우기적제우효과수Z형진자각도증대선증대후감소,당Z형진자각도위60°시제우효과최가.