材料工程
材料工程
재료공정
JOURNAL OF MATERIALS ENGINEERING
2010年
1期
1-4
,共4页
Mg-4Al-2Si合金%Mg_2Si相%显微组织%力学性能
Mg-4Al-2Si閤金%Mg_2Si相%顯微組織%力學性能
Mg-4Al-2Si합금%Mg_2Si상%현미조직%역학성능
Mg-4Al-2Si alloy%Mg_2Si phase%microstructure%mechanical property
采用重力铸造法制备Mg-4Al-2Si(AS42)镁合金,研究了铸态合金的显微组织和室温力学性能.结果表明:铸态AS42合金主要由α-Mg基体、β-Mg_(17)Al_(12)相及Mg_2Si相组成;β-Mg_(17)Al_(12)相呈网状和棒状分布于晶界上,粗大的汉字状Mg_2Si相沿晶界或穿晶分布,多边形块状Mg_2Si相随机分布于基体组织中.铸态合金的硬度为64.5HV,室温抗拉强度为113.5MPa,屈服强度为86MPa,伸长率为4.1%;拉伸断裂形式为准解理脆性断裂.
採用重力鑄造法製備Mg-4Al-2Si(AS42)鎂閤金,研究瞭鑄態閤金的顯微組織和室溫力學性能.結果錶明:鑄態AS42閤金主要由α-Mg基體、β-Mg_(17)Al_(12)相及Mg_2Si相組成;β-Mg_(17)Al_(12)相呈網狀和棒狀分佈于晶界上,粗大的漢字狀Mg_2Si相沿晶界或穿晶分佈,多邊形塊狀Mg_2Si相隨機分佈于基體組織中.鑄態閤金的硬度為64.5HV,室溫抗拉彊度為113.5MPa,屈服彊度為86MPa,伸長率為4.1%;拉伸斷裂形式為準解理脆性斷裂.
채용중력주조법제비Mg-4Al-2Si(AS42)미합금,연구료주태합금적현미조직화실온역학성능.결과표명:주태AS42합금주요유α-Mg기체、β-Mg_(17)Al_(12)상급Mg_2Si상조성;β-Mg_(17)Al_(12)상정망상화봉상분포우정계상,조대적한자상Mg_2Si상연정계혹천정분포,다변형괴상Mg_2Si상수궤분포우기체조직중.주태합금적경도위64.5HV,실온항랍강도위113.5MPa,굴복강도위86MPa,신장솔위4.1%;랍신단렬형식위준해리취성단렬.
Mg-4Al-2Si (AS42) magnesium alloys were prepared by the gravity casting. Microstructure and mechanical properties at room temperature of the as-cast AS42 alloy were investigated. The results show that the as-cast microstructure consists of α-Mg matrix, β-Mg_(17)Al_(12) phase and Mg_2Si phase. The network and rod shaped β-Mg_(17)Al_(12) phase distribute on grain boundary, and the coarse Chinese script type Mg_2Si particles distribute on grain boundary or transcrystallization, while the block-like Mg_2Si distributes in matrix (α-Mg). The hardness of the alloy is 64.5HV, ultimate tensile strength, yield strength and elongation are about 113.5, 86MPa and 4.1% respectively. The fracture forms of the alloy is quasi-cleavage brittle fracture.