西南石油大学学报(自然科学版)
西南石油大學學報(自然科學版)
서남석유대학학보(자연과학판)
JOURNAL OF SOUTHWEST PETROLEUM UNIVERSITY(SEIENCE & TECHNOLOGY EDITION)
2010年
3期
172-175
,共4页
三维%套管%有限元%井径%建模
三維%套管%有限元%井徑%建模
삼유%투관%유한원%정경%건모
套管变形后,在整形前需要有限元分析模拟整形过程,但是其几何建模比较困难.为了解决该问题,定义多臂井径仪测量平面及其法向矢量,在测量平面上建立多臂井径仪的局部坐标系,确定了局部坐标方向的方向余弦矩阵,导出了测量平面上井径仪的测量臂与套管接触点的全局坐标计算公式.根据上述公式,编写程序将计算结果导入ANSYS软件,再通过曲线拟合、蒙皮、拉拔和网格剖分得到了套管变形后有限元模型.利用多臂并径仪实际测量数据进行套管变形后的几何建模,结果表明:所提出的三维套管变形的几何建模方法是可行的,具有较强的实用价值.
套管變形後,在整形前需要有限元分析模擬整形過程,但是其幾何建模比較睏難.為瞭解決該問題,定義多臂井徑儀測量平麵及其法嚮矢量,在測量平麵上建立多臂井徑儀的跼部坐標繫,確定瞭跼部坐標方嚮的方嚮餘絃矩陣,導齣瞭測量平麵上井徑儀的測量臂與套管接觸點的全跼坐標計算公式.根據上述公式,編寫程序將計算結果導入ANSYS軟件,再通過麯線擬閤、矇皮、拉拔和網格剖分得到瞭套管變形後有限元模型.利用多臂併徑儀實際測量數據進行套管變形後的幾何建模,結果錶明:所提齣的三維套管變形的幾何建模方法是可行的,具有較彊的實用價值.
투관변형후,재정형전수요유한원분석모의정형과정,단시기궤하건모비교곤난.위료해결해문제,정의다비정경의측량평면급기법향시량,재측량평면상건립다비정경의적국부좌표계,학정료국부좌표방향적방향여현구진,도출료측량평면상정경의적측량비여투관접촉점적전국좌표계산공식.근거상술공식,편사정서장계산결과도입ANSYS연건,재통과곡선의합、몽피、랍발화망격부분득도료투관변형후유한원모형.이용다비병경의실제측량수거진행투관변형후적궤하건모,결과표명:소제출적삼유투관변형적궤하건모방법시가행적,구유교강적실용개치.