化学工程师
化學工程師
화학공정사
CHEMICAL ENGINEER
2007年
3期
57-59
,共3页
任敏红%陈权生%焦秋菊%刘娟
任敏紅%陳權生%焦鞦菊%劉娟
임민홍%진권생%초추국%류연
微凝胶%剪切%交联%粘度
微凝膠%剪切%交聯%粘度
미응효%전절%교련%점도
对HPAM/Cr3+微凝胶体系在静态和剪切状态下成胶过程进行了对比,并且考察了剪切速率、聚合物浓度、温度及聚合物溶液熟化时间对微凝胶成胶的影响.实验表明:与静态相比,凝胶体系在低剪切状态下成胶较快,成胶后的粘度也较低;剪切速率、温度、聚合物浓度及聚合物溶液熟化时间对剪切状态下微凝胶的成胶时间和成胶粘度都有很大影响.
對HPAM/Cr3+微凝膠體繫在靜態和剪切狀態下成膠過程進行瞭對比,併且攷察瞭剪切速率、聚閤物濃度、溫度及聚閤物溶液熟化時間對微凝膠成膠的影響.實驗錶明:與靜態相比,凝膠體繫在低剪切狀態下成膠較快,成膠後的粘度也較低;剪切速率、溫度、聚閤物濃度及聚閤物溶液熟化時間對剪切狀態下微凝膠的成膠時間和成膠粘度都有很大影響.
대HPAM/Cr3+미응효체계재정태화전절상태하성효과정진행료대비,병차고찰료전절속솔、취합물농도、온도급취합물용액숙화시간대미응효성효적영향.실험표명:여정태상비,응효체계재저전절상태하성효교쾌,성효후적점도야교저;전절속솔、온도、취합물농도급취합물용액숙화시간대전절상태하미응효적성효시간화성효점도도유흔대영향.