纺织器材
紡織器材
방직기재
TEXTILE ACCESSORIES
2010年
4期
9-11
,共3页
余鹏腾%丁浩%朱世根%吴贺龙
餘鵬騰%丁浩%硃世根%吳賀龍
여붕등%정호%주세근%오하룡
扩圈片%回火温度%硬度%弹性%残余变形角度
擴圈片%迴火溫度%硬度%彈性%殘餘變形角度
확권편%회화온도%경도%탄성%잔여변형각도
为了提高移圈针扩圈片的热处理质量,尤其是硬度和弹性,提出用残余变形角度表示扩圈片弹性优劣的方法.通过试验测试研究回火工艺对扩圈片表面硬度及弹性的影响规律,指出:随着回火温度的升高,扩圈片的表面硬度及残余变形角度均呈下降趋势;综合考虑扩圈片的硬度及弹性要求,用SK5钢作为移圈针扩圈片材料时,回火温度应控制在220 ℃~230 ℃为宜.
為瞭提高移圈針擴圈片的熱處理質量,尤其是硬度和彈性,提齣用殘餘變形角度錶示擴圈片彈性優劣的方法.通過試驗測試研究迴火工藝對擴圈片錶麵硬度及彈性的影響規律,指齣:隨著迴火溫度的升高,擴圈片的錶麵硬度及殘餘變形角度均呈下降趨勢;綜閤攷慮擴圈片的硬度及彈性要求,用SK5鋼作為移圈針擴圈片材料時,迴火溫度應控製在220 ℃~230 ℃為宜.
위료제고이권침확권편적열처리질량,우기시경도화탄성,제출용잔여변형각도표시확권편탄성우렬적방법.통과시험측시연구회화공예대확권편표면경도급탄성적영향규률,지출:수착회화온도적승고,확권편적표면경도급잔여변형각도균정하강추세;종합고필확권편적경도급탄성요구,용SK5강작위이권침확권편재료시,회화온도응공제재220 ℃~230 ℃위의.