高压物理学报
高壓物理學報
고압물이학보
CHINESE JOURNAL OF HIGH PRESSURE PHYSICS
2008年
4期
397-401
,共5页
孙贵磊%李晓杰%闫鸿浩%王小红%江德安
孫貴磊%李曉傑%閆鴻浩%王小紅%江德安
손귀뢰%리효걸%염홍호%왕소홍%강덕안
纳米石墨粉%吸附/脱附等温线%孔径分布%爆轰技术
納米石墨粉%吸附/脫附等溫線%孔徑分佈%爆轟技術
납미석묵분%흡부/탈부등온선%공경분포%폭굉기술
graphite nanopowders%adsorption/desorption isotherms%pore size distribution%detonation technique
在酸含量不同的原材料中,通过爆轰的方法制备纳米石墨粉,并利用BET方程以及BJH方法对所得纳米石墨粉进行比表面积和孔径分布分析.分析结果表明,所得爆轰产物中有的比表面积大致为天然鳞片石墨的5.3~9.2倍,而且随酸含量的增大逐渐增大,产物的等温线中存在吸附滞后现象.其中,增大的比表面积主要由分布在3 nm至7 nm之间的孔引起的,而且在爆轰后,孔径4 nm左右的孔,其数量达到最大值.通过对纳米石墨粉的研究,分析了酸在爆轰过程中的积极作用,并为纳米石墨粉的进一步应用提供了结构信息.
在痠含量不同的原材料中,通過爆轟的方法製備納米石墨粉,併利用BET方程以及BJH方法對所得納米石墨粉進行比錶麵積和孔徑分佈分析.分析結果錶明,所得爆轟產物中有的比錶麵積大緻為天然鱗片石墨的5.3~9.2倍,而且隨痠含量的增大逐漸增大,產物的等溫線中存在吸附滯後現象.其中,增大的比錶麵積主要由分佈在3 nm至7 nm之間的孔引起的,而且在爆轟後,孔徑4 nm左右的孔,其數量達到最大值.通過對納米石墨粉的研究,分析瞭痠在爆轟過程中的積極作用,併為納米石墨粉的進一步應用提供瞭結構信息.
재산함량불동적원재료중,통과폭굉적방법제비납미석묵분,병이용BET방정이급BJH방법대소득납미석묵분진행비표면적화공경분포분석.분석결과표명,소득폭굉산물중유적비표면적대치위천연린편석묵적5.3~9.2배,이차수산함량적증대축점증대,산물적등온선중존재흡부체후현상.기중,증대적비표면적주요유분포재3 nm지7 nm지간적공인기적,이차재폭굉후,공경4 nm좌우적공,기수량체도최대치.통과대납미석묵분적연구,분석료산재폭굉과정중적적겁작용,병위납미석묵분적진일보응용제공료결구신식.
N2 adsorption/desorption isotherms and pore diameter distribution of the porous graphite nanopowders,prepared by detonation splitting technique with different acid content in raw materials,were analyzed using Brunauer-Emmet-Teller(BET) equation and Barrett-Joyner-Halenda(BJH) method.The results indicate that there exists hysteresis phenomenon in the product isotherms and the corresponding BET surface area is 5.3~9.2 times of the natural flake graphite which is increasing with the acid content in raw materials.The difference of the BET surface area among the detonation soot is mainly caused by the pore of which diameter distributes between 3 nm and 7 nm.Moreover,the amount of the pore size at about 4 nm arrived at the maximum after detonation.In addition,the research provides sorption capacity information for application and at the same time it also proves that acid has perfect impact on preparing graphite nanopowders.