组合机床与自动化加工技术
組閤機床與自動化加工技術
조합궤상여자동화가공기술
MODULAR MACHINE TOOL & AUTOMATIC MANUFACTURING TECHNIQUE
2011年
9期
77-80
,共4页
金涛%彭晓辉%赵万华%周孜亮
金濤%彭曉輝%趙萬華%週孜亮
금도%팽효휘%조만화%주자량
车铣复合加工中心%结合面%模态分析%模态试验%有限元建模
車鐉複閤加工中心%結閤麵%模態分析%模態試驗%有限元建模
차선복합가공중심%결합면%모태분석%모태시험%유한원건모
结合面是影响机床动态特性的关键因素,在机床有限元建模过程中必须考虑结合面的影响.以某车铣复合加工中心为研究对象,基于固定结合面和移动结合面的有限元建模,建立了整机的有限元模型.对整机有限元模型进行模态分析,并对整机进行模态试验,然后将整机的模态分析的计算结果与实验结果相比较,证实了该有限元模型的准确性和该结合面建模方法的有效性.
結閤麵是影響機床動態特性的關鍵因素,在機床有限元建模過程中必鬚攷慮結閤麵的影響.以某車鐉複閤加工中心為研究對象,基于固定結閤麵和移動結閤麵的有限元建模,建立瞭整機的有限元模型.對整機有限元模型進行模態分析,併對整機進行模態試驗,然後將整機的模態分析的計算結果與實驗結果相比較,證實瞭該有限元模型的準確性和該結閤麵建模方法的有效性.
결합면시영향궤상동태특성적관건인소,재궤상유한원건모과정중필수고필결합면적영향.이모차선복합가공중심위연구대상,기우고정결합면화이동결합면적유한원건모,건립료정궤적유한원모형.대정궤유한원모형진행모태분석,병대정궤진행모태시험,연후장정궤적모태분석적계산결과여실험결과상비교,증실료해유한원모형적준학성화해결합면건모방법적유효성.