玻璃钢/复合材料
玻璃鋼/複閤材料
파리강/복합재료
FIBER REINFORCED PLASTICS/COMPOSITES
2010年
1期
46-48,52
,共4页
梁晓宁%李炜%罗永康%张锦南
樑曉寧%李煒%囉永康%張錦南
량효저%리위%라영강%장금남
复合材料液体模塑成型(LCM)%渗透率%树脂流动前锋
複閤材料液體模塑成型(LCM)%滲透率%樹脂流動前鋒
복합재료액체모소성형(LCM)%삼투솔%수지류동전봉
liquid composite molding(LCM)%permeability%resin flow front
本文利用在线监测系统,采用径向法对厚铺层结构纤维增强体渗透性能进行了实验研究.通过对不同铺层厚度玻璃纤维增强体中测试液流动前沿以及渗透率的比较分析,发现对于厚铺层结构,渗透率随铺层厚度的增加逐渐减小,并且这个减小的趋势逐渐趋于平缓.通过对一定铺层厚度增强体中,测试液在顶层和底层渗透情况的比较,发现两者之间存在一定量的差异,此差异随铺层厚度的增加而增大.并且发现充模过程中存在一个顶层和底层渗透达到同步的时刻,此时间值随铺层厚度的增加而增大.
本文利用在線鑑測繫統,採用徑嚮法對厚鋪層結構纖維增彊體滲透性能進行瞭實驗研究.通過對不同鋪層厚度玻璃纖維增彊體中測試液流動前沿以及滲透率的比較分析,髮現對于厚鋪層結構,滲透率隨鋪層厚度的增加逐漸減小,併且這箇減小的趨勢逐漸趨于平緩.通過對一定鋪層厚度增彊體中,測試液在頂層和底層滲透情況的比較,髮現兩者之間存在一定量的差異,此差異隨鋪層厚度的增加而增大.併且髮現充模過程中存在一箇頂層和底層滲透達到同步的時刻,此時間值隨鋪層厚度的增加而增大.
본문이용재선감측계통,채용경향법대후포층결구섬유증강체삼투성능진행료실험연구.통과대불동포층후도파리섬유증강체중측시액류동전연이급삼투솔적비교분석,발현대우후포층결구,삼투솔수포층후도적증가축점감소,병차저개감소적추세축점추우평완.통과대일정포층후도증강체중,측시액재정층화저층삼투정황적비교,발현량자지간존재일정량적차이,차차이수포층후도적증가이증대.병차발현충모과정중존재일개정층화저층삼투체도동보적시각,차시간치수포층후도적증가이증대.
With the help of sensing and monitoring system,the permeable property of thick-section reinforcements was studied with the radial permeability testing method.By comparing and analyzing different laid-up thickness of glass fiber reinforcements,it is noticed that the permeability is decreasing when thickness of reinforcements increase.The slope of the decreasing is getting smaller with thicker section of the reinforcements.By comparing flow front position of the top and bottom layer of the reinforcements,it is found that the lead-leg difference between the top and bottom layer is increasing when the thickness of reinforcement increases.It is found that the flow front position of the top and botton layer will keep catch up with each other at certain time.The time is getting larger when thickness of reinforcement increases.