辐射研究与辐射工艺学报
輻射研究與輻射工藝學報
복사연구여복사공예학보
JOURNAL OF RADIATION RESEARCH AND RADIATION PROCESSING
2005年
3期
151-154
,共4页
电子束辐照%接枝反应%聚丙烯无纺布%AN/AA
電子束輻照%接枝反應%聚丙烯無紡佈%AN/AA
전자속복조%접지반응%취병희무방포%AN/AA
研究了以电子束辐照预处理聚丙烯(PP)无纺布接枝丙烯酸(AA)和丙烯腈(AN),AA与AN的共接枝的最佳反应条件是:辐照剂量为200kGy,反应温度为75℃,反应4 h,添加剂用硫酸约0.05moL/L,摩尔盐为0.08%,且单体比例为40/60、浓度为50%,同时也探讨了阻聚剂[(NH4)2Fe(SO4)2]对反应接枝率的影响.FT-IR结果反映了单体浓度变化时总接枝率的变化情况,单体比例对总接枝率的影响与其单体自身的稳定性有关,但总接枝率在所给定的单体浓度范围内一直增大.
研究瞭以電子束輻照預處理聚丙烯(PP)無紡佈接枝丙烯痠(AA)和丙烯腈(AN),AA與AN的共接枝的最佳反應條件是:輻照劑量為200kGy,反應溫度為75℃,反應4 h,添加劑用硫痠約0.05moL/L,摩爾鹽為0.08%,且單體比例為40/60、濃度為50%,同時也探討瞭阻聚劑[(NH4)2Fe(SO4)2]對反應接枝率的影響.FT-IR結果反映瞭單體濃度變化時總接枝率的變化情況,單體比例對總接枝率的影響與其單體自身的穩定性有關,但總接枝率在所給定的單體濃度範圍內一直增大.
연구료이전자속복조예처리취병희(PP)무방포접지병희산(AA)화병희정(AN),AA여AN적공접지적최가반응조건시:복조제량위200kGy,반응온도위75℃,반응4 h,첨가제용류산약0.05moL/L,마이염위0.08%,차단체비례위40/60、농도위50%,동시야탐토료조취제[(NH4)2Fe(SO4)2]대반응접지솔적영향.FT-IR결과반영료단체농도변화시총접지솔적변화정황,단체비례대총접지솔적영향여기단체자신적은정성유관,단총접지솔재소급정적단체농도범위내일직증대.