小型微型计算机系统
小型微型計算機繫統
소형미형계산궤계통
MINI-MICRO SYSTEMS
2011年
1期
177-180
,共4页
张晓辉%于东%郑飂默%秦承刚%韩文业
張曉輝%于東%鄭飂默%秦承剛%韓文業
장효휘%우동%정료묵%진승강%한문업
高速加工%微小线段%过渡圆弧%数控系统
高速加工%微小線段%過渡圓弧%數控繫統
고속가공%미소선단%과도원호%수공계통
为满足微小线段高速加工的需求,在分析现有微小线段过渡算法不足的基础上,建立了圆弧过渡矢量夹角数学模型,
并给出一种基于过渡圆弧的微小线段平滑过渡算法.该算法能够根据加工精度和微小线段长度确定出微小线段的转角点和过
渡圆弧的大小,并可通过机床机械特性来限制过渡圆弧的最大进给速度,从而能够在保证加工精度和满足机床机械特性的条件下,最大限度的提高微小线段加工速度.最后对所提出的过渡算法进行了实际加工验证,验证结果表明该算法具有过渡平稳、误差易控、转角速度高的特点,可实现微小线段的高速和高精加工.
為滿足微小線段高速加工的需求,在分析現有微小線段過渡算法不足的基礎上,建立瞭圓弧過渡矢量夾角數學模型,
併給齣一種基于過渡圓弧的微小線段平滑過渡算法.該算法能夠根據加工精度和微小線段長度確定齣微小線段的轉角點和過
渡圓弧的大小,併可通過機床機械特性來限製過渡圓弧的最大進給速度,從而能夠在保證加工精度和滿足機床機械特性的條件下,最大限度的提高微小線段加工速度.最後對所提齣的過渡算法進行瞭實際加工驗證,驗證結果錶明該算法具有過渡平穩、誤差易控、轉角速度高的特點,可實現微小線段的高速和高精加工.
위만족미소선단고속가공적수구,재분석현유미소선단과도산법불족적기출상,건립료원호과도시량협각수학모형,
병급출일충기우과도원호적미소선단평활과도산법.해산법능구근거가공정도화미소선단장도학정출미소선단적전각점화과
도원호적대소,병가통과궤상궤계특성래한제과도원호적최대진급속도,종이능구재보증가공정도화만족궤상궤계특성적조건하,최대한도적제고미소선단가공속도.최후대소제출적과도산법진행료실제가공험증,험증결과표명해산법구유과도평은、오차역공、전각속도고적특점,가실현미소선단적고속화고정가공.